Related resources
Full-text held externally
Search for item elsewhere
University researcher(s)
Academic department(s)
Material Interactions in a Novel Pinless Tool Approach to Friction Stir Spot Welding Thin Aluminium Sheet
D. Bakavos, Y-C. Chen, L. Babout and P. B.Prangnell
Metallurgical and Materials Transactions A. 2011;42A(5):1266-1282.
Access to files
Full-text and supplementary files are not available from Manchester eScholar. Full-text is available externally using the following links:
Full-text held externally
Abstract
The requirement for a probe, or pin, in friction stir spot welding (FSSW) leads to an undesirable keyhole and ‘‘hooking,’’ which can influence the fracture path and weld strength. Furthermore, the full weld cycle for FSSW is typically longer than ideal for the automotive industry, being 2 to 5 seconds. Here, it is shown that using a novel pinless tool design it is possible to achieve high lap shear strength (~3.4 kN) in thin aluminum sheet (~1 mm thick), with short weld cycle times (<1 second). Several techniques have been exploited to study the material flow and mechanisms of weld formation in pinless FSSW, including high-resolution X-ray tomography, to understand the role of the tool design and weld parameters. Despite the ‘‘simple’’ nature of a pinless tool, material flow in the weld zone was found to be surprisingly complex and strongly influenced by surface features on the tool, which greatly increased the penetration of the plastic zone into the bottom sheet. Because of the rapid thermal cycle and high level of grain refinement, the weld zone was found to develop a higher strength than the parent material with little evidence of a heat affected zone (HAZ) after postweld natural aging.