In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

EXPERIMENTAL AND COMPUTATIONAL STUDY OF THE BEHAVIOUR OF FREE-CELLS IN DISCHARGING SILOS

Mack, Stuart Anderson

[Thesis]. Manchester, UK: The University of Manchester; 2011.

Access to files

Abstract

This study aims to deduce an appropriate shape and density for an electronic free-cell that could be placed into a silo so that position and other desired physical parameters could be recorded.To determine how density and shape affects the trajectory and displacement of free cells, the trajectory and displacement of cylindrical, cuboid and triangular prism free-cells of equivalent volume was investigated in a discharging quasi 3D silo slice. The free-cells were placed at twelve different starting positions spread evenly over one half of the 3D slice. Tests were conducted using a monosized batch of spherical particles with a diameter of approximately 5 mm. Tests were also conducted in a binary mixture consisting of particles of different sizes (5 mm/4 mm) and the same density (1.28 g/cm3) and a binary mixture consisting of particles of different size (6 mm/5 mm) and different densities (1.16 g/cm3/1.28 g/cm3).The rotation of the free cells was also briefly discussed.Computer simulations were conducted using the Discrete Element Method (DEM). The simulation employed the spring-slider-dashpot contact model to represent the normal and tangential force components and the modified Euler integration scheme was applied to calculate the particle velocities and positions at each time step. One trial of each of the metal and plastic, cylindrical, cuboid and triangular prism free cells was compared with the average of three experimental trials. The trajectory and displacement of a representative particle positioned at the same starting position as the free cell was also obtained from DEM simulation and compared with the path and displacement of each of the free cells to determine which free cell followed the particle most closely and hence to determine a suitable free cell that would move with the rest of the grains. Spherical particles are idealised particles. Therefore tests were also conducted with a small number of polyhedral particles, to deduce their flow rate and the critical orifice width at which blockages were likely to form. Simulations were also conducted to test the feasibility of the DEM in modelling the behaviour of these polyhedral particles.Results indicate that for a free cell to move along the same trajectory and have the same displacement and velocity as an equivalent particle in the batch it should have a similar density to the majority of the other particles. A cylindrical free cell of similar density to the particles was found to follow the path of the representative particle more closely than the cuboid or triangular prism. Polyhedral particles were found to have a greater flow rate than spherical particles of equivalent volume.

Additional content not available electronically

Two CD's containing extra data and films of a discharging quasi-3D silo.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
PhD Chemical Engineering & Analytical Science
Publication date:
Location:
Manchester, UK
Total pages:
327
Abstract:
This study aims to deduce an appropriate shape and density for an electronic free-cell that could be placed into a silo so that position and other desired physical parameters could be recorded.To determine how density and shape affects the trajectory and displacement of free cells, the trajectory and displacement of cylindrical, cuboid and triangular prism free-cells of equivalent volume was investigated in a discharging quasi 3D silo slice. The free-cells were placed at twelve different starting positions spread evenly over one half of the 3D slice. Tests were conducted using a monosized batch of spherical particles with a diameter of approximately 5 mm. Tests were also conducted in a binary mixture consisting of particles of different sizes (5 mm/4 mm) and the same density (1.28 g/cm3) and a binary mixture consisting of particles of different size (6 mm/5 mm) and different densities (1.16 g/cm3/1.28 g/cm3).The rotation of the free cells was also briefly discussed.Computer simulations were conducted using the Discrete Element Method (DEM). The simulation employed the spring-slider-dashpot contact model to represent the normal and tangential force components and the modified Euler integration scheme was applied to calculate the particle velocities and positions at each time step. One trial of each of the metal and plastic, cylindrical, cuboid and triangular prism free cells was compared with the average of three experimental trials. The trajectory and displacement of a representative particle positioned at the same starting position as the free cell was also obtained from DEM simulation and compared with the path and displacement of each of the free cells to determine which free cell followed the particle most closely and hence to determine a suitable free cell that would move with the rest of the grains. Spherical particles are idealised particles. Therefore tests were also conducted with a small number of polyhedral particles, to deduce their flow rate and the critical orifice width at which blockages were likely to form. Simulations were also conducted to test the feasibility of the DEM in modelling the behaviour of these polyhedral particles.Results indicate that for a free cell to move along the same trajectory and have the same displacement and velocity as an equivalent particle in the batch it should have a similar density to the majority of the other particles. A cylindrical free cell of similar density to the particles was found to follow the path of the representative particle more closely than the cuboid or triangular prism. Polyhedral particles were found to have a greater flow rate than spherical particles of equivalent volume.
Additional digital content not deposited electronically:
Two CD's containing extra data and films of a discharging quasi-3D silo.
Thesis main supervisor(s):
Funder(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:129256
Created by:
Mack, Stuart
Created:
21st August, 2011, 12:04:05
Last modified by:
Mack, Stuart
Last modified:
2nd November, 2011, 15:17:01

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.