In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Optimisation of Photovoltaic-Powered Electrolysis for Hydrogen Production for a Remote Area in Libya

Elamari, Matouk M Mh

[Thesis]. Manchester, UK: The University of Manchester; 2011.

Access to files

Abstract

Hydrogen is a potential future energy storage medium to supplement a variety of renewable energy sources. It can be regarded as an environmentally-friendly fuel, especially when it is extracted from water using electricity obtained from solar panels or wind turbines. The focus in this thesis is on solar energy, and the theoretical background (i.e., PSCAD computer simulation) and experimental work related to a water-splitting, hydrogen-production system are presented. The hydrogen production system was powered by a photovoltaic (PV) array using a proton exchange membrane (PEM) electrolyser. The PV array and PEM electrolyser display an inherently non-linear current–voltage relationship that requires optimal matching of maximum operating power. Optimal matching between the PV system and the electrolyser is essential to maximise the transfer of electrical energy and the rate of hydrogen production. A DC/DC converter is used for power matching by shifting the PEM electrolyser I-V curve as closely as possible toward the maximum power the PV can deliver. By taking advantage of the I-V characteristics of the electrolyser (i.e., the DC/DC converter output voltage is essentially constant whereas the current increases dramatically), we demonstrated experimentally and in simulations that the hydrogen production of the PV-electrolyser system can be optimised by adjusting the duty cycle generated by the pulse-width modulation (PWM) circuit. The strategy used was to fix the duty cycle at the ratio of the PV maximum power voltage to the electrolyser operating voltage. A stand-alone PV energy system, using hydrogen as the storage medium, was designed. The system would be suitable for providing power for a family’s house located in a remote area in the Libyan Sahara.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
PhD Mechanical Engineering
Publication date:
Location:
Manchester, UK
Total pages:
166
Abstract:
Hydrogen is a potential future energy storage medium to supplement a variety of renewable energy sources. It can be regarded as an environmentally-friendly fuel, especially when it is extracted from water using electricity obtained from solar panels or wind turbines. The focus in this thesis is on solar energy, and the theoretical background (i.e., PSCAD computer simulation) and experimental work related to a water-splitting, hydrogen-production system are presented. The hydrogen production system was powered by a photovoltaic (PV) array using a proton exchange membrane (PEM) electrolyser. The PV array and PEM electrolyser display an inherently non-linear current–voltage relationship that requires optimal matching of maximum operating power. Optimal matching between the PV system and the electrolyser is essential to maximise the transfer of electrical energy and the rate of hydrogen production. A DC/DC converter is used for power matching by shifting the PEM electrolyser I-V curve as closely as possible toward the maximum power the PV can deliver. By taking advantage of the I-V characteristics of the electrolyser (i.e., the DC/DC converter output voltage is essentially constant whereas the current increases dramatically), we demonstrated experimentally and in simulations that the hydrogen production of the PV-electrolyser system can be optimised by adjusting the duty cycle generated by the pulse-width modulation (PWM) circuit. The strategy used was to fix the duty cycle at the ratio of the PV maximum power voltage to the electrolyser operating voltage. A stand-alone PV energy system, using hydrogen as the storage medium, was designed. The system would be suitable for providing power for a family’s house located in a remote area in the Libyan Sahara.
Thesis main supervisor(s):
Funder(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:132695
Created by:
Elamari, Matouk
Created:
7th October, 2011, 13:39:20
Last modified by:
Elamari, Matouk
Last modified:
18th November, 2011, 13:07:04

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.