In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Development of reliable vibration-based condition indicators and their data fusion for the robust health diagnosis of gearboxes

Rzeszucinski, Pawel Jakub

[Thesis]. Manchester, UK: The University of Manchester; 2012.

Access to files

Abstract

Performing condition monitoring related tasks on any machinery is an essential element of their rational maintenance. Endeavours to detect an incipient fault within a system serve multiple purposes from increasing the safety of people responsible for operating the machines through decreasing the running and operational costs, allowing time to plan for the inevitable repairs and making sure that the downtime of the machine is kept to an absolute minimum. All these tasks gain extra importance in a case when machines are operated in dangerous conditions putting people’s lives in potential jeopardy – for instance in the field of operating a helicopter.The robust assessment of the condition of gearboxes used by helicopters has recently been given an increased attention due to a number of accidents which followed an undetected drive train component failure. The majority of the on-board mounted condition monitoring systems use vibration response signals which are specifically processed to obtain a single number which is representative of a condition of a given monitored drive train component. Those signal processing methods are called Condition Indicators (CIs). There are a number of such CIs which are already in use and they seem to adequately indicate faults in most of the cases. However in a number of instances it has been observed that the most popular parameters like Crest Factor or FM4 failed to dependably reflect the true condition of the gear causing serious accidents, some of which resulted in a number of lives being lost. For this reason the presented research is focused on investigating the limitations of the existing CIs and designing a set of improved CIs. The development process is based on overcoming the drawbacks of thetechniques used in existing CIs combined with the intelligence gathered while analysing the acceleration vibration signals which contained a gear or a bearing fault. Five new CIs are proposed and the details of their design are documented. Both the existing and the proposed CIs are applied on the available, uncorrelated datasets. The results of the comparison show that the newly developed CIs are capable of indicating a gear or a bearing fault in a more robust and dependable fashion.Each proposed CI alone may not be the most robust indicator of the actual condition of the monitored component hence the output from all proposed CIs is combined into a single indication through use of a novel data fusion model. The Combined CI created based on the data fusion model is observed to be more robust compared to each CI alone, hence it may increase the confidence level of the decision making routine and is expected to decrease the number of false alarms. The methods of the existing CIs, the proposed CIs and the data fusion techniques as well as the results of the comparison between the different approaches are present in this thesis.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Engineering
Degree programme:
EngD Mechanical, Aerospace and Civil Engineering
Publication date:
Location:
Manchester, UK
Total pages:
229
Abstract:
Performing condition monitoring related tasks on any machinery is an essential element of their rational maintenance. Endeavours to detect an incipient fault within a system serve multiple purposes from increasing the safety of people responsible for operating the machines through decreasing the running and operational costs, allowing time to plan for the inevitable repairs and making sure that the downtime of the machine is kept to an absolute minimum. All these tasks gain extra importance in a case when machines are operated in dangerous conditions putting people’s lives in potential jeopardy – for instance in the field of operating a helicopter.The robust assessment of the condition of gearboxes used by helicopters has recently been given an increased attention due to a number of accidents which followed an undetected drive train component failure. The majority of the on-board mounted condition monitoring systems use vibration response signals which are specifically processed to obtain a single number which is representative of a condition of a given monitored drive train component. Those signal processing methods are called Condition Indicators (CIs). There are a number of such CIs which are already in use and they seem to adequately indicate faults in most of the cases. However in a number of instances it has been observed that the most popular parameters like Crest Factor or FM4 failed to dependably reflect the true condition of the gear causing serious accidents, some of which resulted in a number of lives being lost. For this reason the presented research is focused on investigating the limitations of the existing CIs and designing a set of improved CIs. The development process is based on overcoming the drawbacks of thetechniques used in existing CIs combined with the intelligence gathered while analysing the acceleration vibration signals which contained a gear or a bearing fault. Five new CIs are proposed and the details of their design are documented. Both the existing and the proposed CIs are applied on the available, uncorrelated datasets. The results of the comparison show that the newly developed CIs are capable of indicating a gear or a bearing fault in a more robust and dependable fashion.Each proposed CI alone may not be the most robust indicator of the actual condition of the monitored component hence the output from all proposed CIs is combined into a single indication through use of a novel data fusion model. The Combined CI created based on the data fusion model is observed to be more robust compared to each CI alone, hence it may increase the confidence level of the decision making routine and is expected to decrease the number of false alarms. The methods of the existing CIs, the proposed CIs and the data fusion techniques as well as the results of the comparison between the different approaches are present in this thesis.
Thesis main supervisor(s):
Thesis co-supervisor(s):
Funder(s):
Language:
en

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:181665
Created by:
Rzeszucinski, Pawel
Created:
18th November, 2012, 10:45:57
Last modified by:
Rzeszucinski, Pawel
Last modified:
1st December, 2017, 09:11:37

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.