In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

The effects of laser-induced modification of surface roughness of Al2O3-based ceramics on fluid contact angle

Triantafyllidis, D; Li, Lin; Stott, FH

Materials Science and Engineering A. 2005;390:271-277.

Access to files

Full-text and supplementary files are not available from Manchester eScholar. Full-text is available externally using the following links:

Full-text held externally

Abstract

Laser surface treatment of Al2O3-based refractory ceramics, by melting and re-solidification, can be successfully applied to producing surfaces that are pore-free, homogeneous and crack-free. Such treated surfaces can lead to an increase in the corrosion and erosion resistances of the materials, due to lower permeability to corrosive species and higher surface hardness, respectively. Furthermore, the corrosion resistance can be influenced by the wetting characteristics of the treated surfaces in service environment. Therefore, it is important to investigate the effect of laser treatment of ceramic materials on the interaction of the surface with the various environmental elements. This work is concerned with an experimental investigation of the effects of laser surface treatment, by melting and re-solidification, on the fluid contact angles of Al2O3-based refractory ceramics. These effects are examined by the modification of the surface roughness characteristics induced by laser treatment. Laser-treated surfaces, both containing cracks and crack-free, are compared with untreated surfaces and the results are reported. The untreated surfaces demonstrated considerable non-uniformity in wetting, in contrast to the treated surfaces. The extent of wetting of the laser-treated surfaces containing cracks was proportional to laser power density. This is due to wetting being enhanced, among other factors, by surface roughness, which increased with power density. The crack-free surfaces were the most smooth and, thereby, exhibited the smallest extent of wettability variations. The reduction in wettability after the laser treatment (crack-free) may have an advantage for corrosion resistance.

Bibliographic metadata

Content type:
Publication type:
Publication form:
Published date:
Abbreviated journal title:
ISSN:
Publisher:
Publishers website:
http://www.sciencedirect.com/science/journal/09215093
Volume:
390
Start page:
271
End page:
277
Total:
7
Pagination:
271-277
Digital Object Identifier:
10.1016/j.msea.2004.08.016
Related website(s):
  • Related website http://portal.isiknowledge.com/portal.cgi?DestApp=WOS&Func=Frame
Access state:
Active

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:1e323
Created:
17th September, 2009, 21:34:41
Last modified:
18th August, 2015, 12:53:08

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.