In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

CRASH SIMULATION OF FIBRE METAL LAMINATE FUSELAGE

Abdullah, Ahmad Sufian

[Thesis]. Manchester, UK: The University of Manchester; 2014.

Access to files

Abstract

A finite element model of fibre metal laminate (FML) fuselage was developed in order to evaluate its impact response under survivable crash event. To create a reliable crash finite element (FE) model of FML fuselage, a ‘building block approach’ is adapted. It involves a series of validation and verification tasks in order to establish reliable material and damage models, verified impact model with structural instability and large displacement and verified individual fuselage structure under crash event. This novel development methodology successfully produced an FE model to simulate crash of both aluminium alloy and FML fuselage under survivable crash event using ABAQUS/Explicit. On the other hand, this allows the author to have privilege to evaluate crashworthiness of fuselage that implements FML fuselage skin for the whole fuselage section for the first time in aircraft research field and industry. The FE models consist of a two station fuselage section with one meter longitudinal length which is based on commercial Boeing 737 aircraft. For FML fuselage, the classical aluminium alloy skin was replaced by GLARE grade 5-2/1. The impact response of both fuselages was compared to each other and the results were discussed in terms of energy dissipation, crushing distance, failure modes, failure mechanisms and acceleration response at floor-level. Overall, it was observed that FML fuselage responded similarly to aluminium alloy fuselage with some minor differences which conclusively gives great confidence to aircraft designer to use FML as fuselage skin for the whole fuselage section. In terms of crushing distance, FML fuselage skin contributed to the failure mechanisms of the fuselage section that lead to higher crushing distance than in aluminium alloy fuselage. The existence of various failure modes within FML caused slight differences from the aluminium fuselage in terms of deformation process and energy dissipation. These complex failure modes could potentially be manipulated to produce future aircraft structure with better crashworthiness performance.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
PhD Mechanical Engineering
Publication date:
Location:
Manchester, UK
Total pages:
166
Abstract:
A finite element model of fibre metal laminate (FML) fuselage was developed in order to evaluate its impact response under survivable crash event. To create a reliable crash finite element (FE) model of FML fuselage, a ‘building block approach’ is adapted. It involves a series of validation and verification tasks in order to establish reliable material and damage models, verified impact model with structural instability and large displacement and verified individual fuselage structure under crash event. This novel development methodology successfully produced an FE model to simulate crash of both aluminium alloy and FML fuselage under survivable crash event using ABAQUS/Explicit. On the other hand, this allows the author to have privilege to evaluate crashworthiness of fuselage that implements FML fuselage skin for the whole fuselage section for the first time in aircraft research field and industry. The FE models consist of a two station fuselage section with one meter longitudinal length which is based on commercial Boeing 737 aircraft. For FML fuselage, the classical aluminium alloy skin was replaced by GLARE grade 5-2/1. The impact response of both fuselages was compared to each other and the results were discussed in terms of energy dissipation, crushing distance, failure modes, failure mechanisms and acceleration response at floor-level. Overall, it was observed that FML fuselage responded similarly to aluminium alloy fuselage with some minor differences which conclusively gives great confidence to aircraft designer to use FML as fuselage skin for the whole fuselage section. In terms of crushing distance, FML fuselage skin contributed to the failure mechanisms of the fuselage section that lead to higher crushing distance than in aluminium alloy fuselage. The existence of various failure modes within FML caused slight differences from the aluminium fuselage in terms of deformation process and energy dissipation. These complex failure modes could potentially be manipulated to produce future aircraft structure with better crashworthiness performance.
Thesis main supervisor(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:239049
Created by:
Abdullah, Ahmad
Created:
5th November, 2014, 14:11:18
Last modified by:
Abdullah, Ahmad
Last modified:
9th September, 2016, 13:01:27

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.