In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Raman Spectroscopic Studies of the Mechanics of Graphene-based Nanocomposites

Li, Zheling

[Thesis]. Manchester, UK: The University of Manchester; 2015.

Access to files

Abstract

The reinforcement mechanisms in graphene-based nanocomposites have been studied in this project, which primarily consists of three parts: the size and orientation effects of the graphene-based nano-fillers and their interfacial adhesion with the matrix. Overall Raman spectroscopy has been demonstrated to be a powerful technique to study the graphene-based nanocomposites.The deformation of small size graphene has been followed and a new model has been established to consider both the non-uniformity of strain along the graphene and laser intensity within the laser spot, which interprets the observed unusual Raman band shift well. Additionally, the deformation of monolayer graphene oxide (GO) has been followed for the first time. It appears that continuum mechanics is still valid, and the approximately constant strain distribution along the GO flake suggests a better stress transfer efficiency of GO than that of graphene. The spatial orientation of graphene has been studied based on the Raman scattering obtained from transverse sections of graphene, where the Raman bands intensities show a strong polarization dependence. Based on this, a new model has been established to quantify the spatial orientation of graphene in terms of an orientation distribution function, and the spatial orientation of monolayer graphene has been further confirmed by its surface roughness. This model has been extended to a variety of graphene-based materials and nanocomposites. It is also shown how the spatial orientation of graphene-based fillers affects the mechanical properties of the nanocomposites, through the first determination of the Krenchel orientation factor for nanoplatelets.The findings on both the size and orientation effects have been employed to study the deformation mechanics of bulk GO reinforced nanocomposite films. It has been demonstrated for the first time that the effective modulus of GO can be estimated using the Raman D band shift rate, and this is in agreement with the value measured using conventional mechanical testing. The effective modulus of GO is found to be lower than its Young’s modulus, probably due to the mis-orientation, waviness, wrinkling and agglomeration of the GO fillers.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
PhD Materials
Publication date:
Location:
Manchester, UK
Total pages:
194
Abstract:
The reinforcement mechanisms in graphene-based nanocomposites have been studied in this project, which primarily consists of three parts: the size and orientation effects of the graphene-based nano-fillers and their interfacial adhesion with the matrix. Overall Raman spectroscopy has been demonstrated to be a powerful technique to study the graphene-based nanocomposites.The deformation of small size graphene has been followed and a new model has been established to consider both the non-uniformity of strain along the graphene and laser intensity within the laser spot, which interprets the observed unusual Raman band shift well. Additionally, the deformation of monolayer graphene oxide (GO) has been followed for the first time. It appears that continuum mechanics is still valid, and the approximately constant strain distribution along the GO flake suggests a better stress transfer efficiency of GO than that of graphene. The spatial orientation of graphene has been studied based on the Raman scattering obtained from transverse sections of graphene, where the Raman bands intensities show a strong polarization dependence. Based on this, a new model has been established to quantify the spatial orientation of graphene in terms of an orientation distribution function, and the spatial orientation of monolayer graphene has been further confirmed by its surface roughness. This model has been extended to a variety of graphene-based materials and nanocomposites. It is also shown how the spatial orientation of graphene-based fillers affects the mechanical properties of the nanocomposites, through the first determination of the Krenchel orientation factor for nanoplatelets.The findings on both the size and orientation effects have been employed to study the deformation mechanics of bulk GO reinforced nanocomposite films. It has been demonstrated for the first time that the effective modulus of GO can be estimated using the Raman D band shift rate, and this is in agreement with the value measured using conventional mechanical testing. The effective modulus of GO is found to be lower than its Young’s modulus, probably due to the mis-orientation, waviness, wrinkling and agglomeration of the GO fillers.
Thesis main supervisor(s):
Thesis co-supervisor(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:267458
Created by:
Li, Zheling
Created:
27th June, 2015, 09:55:03
Last modified by:
Li, Zheling
Last modified:
16th November, 2017, 14:24:43

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.