In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Characterisation of the deformation mechanisms in hcp metals by combined use of X-ray imaging and diffraction techniques

Nervo, Laura

[Thesis]. Manchester, UK: The University of Manchester; 2015.

Access to files

Abstract

We envisage a fundamental study of the physical mechanisms (dislocation slip versus deformation twinning) involved in plastic deformation of hexagonal close-packed (HCP) metals like titanium and magnesium. A novel combination of X-ray imaging and diffraction techniques, termed X-ray diffraction contrast tomography (DCT), will be used to investigate details of the deformation process in the bulk of polycrystalline specimen. DCT provides access to the position, 3D shape, (average) orientation and elastic strain tensor of grains in polycrystalline sample volumes containing up to 1000 grains and more.Ultimately, an extension of the X-ray DCT technique is associated with a section topography methodology on the same instrument. This combination enables the measurement of local orientation and elastic strain tensors inside selected bulk grains. A very preliminary study of this approach is carried out on a magnesium alloy, underlying the current limitations and possible improvements of such approach.In this thesis, the data acquisition and analysis procedures required for this type of combined characterisation approach have been developed. The work is supported by the use of neutron diffraction, for an in-situ loading experiments, and two-dimensional electron backscatter diffraction (EBSD), for the initial microstructure of the materials and cross-validation of the results obtained with the X-ray DCT technique.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
Split-Site PhD Materials
Publication date:
Location:
Manchester, UK
Total pages:
282
Abstract:
We envisage a fundamental study of the physical mechanisms (dislocation slip versus deformation twinning) involved in plastic deformation of hexagonal close-packed (HCP) metals like titanium and magnesium. A novel combination of X-ray imaging and diffraction techniques, termed X-ray diffraction contrast tomography (DCT), will be used to investigate details of the deformation process in the bulk of polycrystalline specimen. DCT provides access to the position, 3D shape, (average) orientation and elastic strain tensor of grains in polycrystalline sample volumes containing up to 1000 grains and more.Ultimately, an extension of the X-ray DCT technique is associated with a section topography methodology on the same instrument. This combination enables the measurement of local orientation and elastic strain tensors inside selected bulk grains. A very preliminary study of this approach is carried out on a magnesium alloy, underlying the current limitations and possible improvements of such approach.In this thesis, the data acquisition and analysis procedures required for this type of combined characterisation approach have been developed. The work is supported by the use of neutron diffraction, for an in-situ loading experiments, and two-dimensional electron backscatter diffraction (EBSD), for the initial microstructure of the materials and cross-validation of the results obtained with the X-ray DCT technique.
Thesis main supervisor(s):
Thesis co-supervisor(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:272436
Created by:
Nervo, Laura
Created:
8th September, 2015, 14:22:44
Last modified by:
Nervo, Laura
Last modified:
16th November, 2017, 12:38:40

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.