Search the site

The University of Manchester Library

In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Novel Scalable and Real-time Embedded Transceiver System

Mohammed, Rand Basil

[Thesis]. Manchester, UK: The University of Manchester; 2017.

Access to files

Abstract

Our society increasingly relies on the transmission and reception of vast amounts of data using serial connections featuring ever-increasing bit rates. In imaging systems, for example, the frame rate achievable is often limited by the serial link between camera and host even when modern serial buses with the highest bit rates are used. This thesis documents a scalable embedded transceiver system with a bandwidth and interface standard that can be adapted to suit a particular application. This new approach for a real-time scalable embedded transceiver system is referred to as a Novel Reference Model (NRM), which connects two or more applications through a transceiver network in order to provide real-time data to a host system. Different transceiver interfaces for which the NRM model has been tested include: LVDS, GIGE, PMA-direct, Rapid-IO and XAUI, one support a specific range for transceiver speed that suites a special type for transceiver physical medium. The scalable serial link approach has been extended with loss-less data compression with the aim of further increasing dataflow at a given bit rate. Two lossless compression methods were implemented, based on Huffman coding and a novel method called Reduced Lossless Compression Method (RLCM). Both methods are integrated into the scalable transceivers providing a comprehensive solution for optimal data transmission over a variety of different interfaces. The NRM is implemented on a field programmable gate array (FPGA) using a system architecture that consists of three layers: application, transport and physical. A Terasic DE4 board was used as the main platform for implementing and testing the embedded system, while Quartus-II software and tools were used to design and debug the embedded hardware systems.

Bibliographic metadata

Type of resource:
Content type:
Administered thesis
Form of thesis:
Traditional
Type of submission:
Doctoral level ETD - final
Thesis title:
Novel Scalable and Real-time Embedded Transceiver System
Degree type:
Doctor of Philosophy
Degree programme:
PhD Electrical and Electronic Engineering
Publication date:
2017-08-12T20:28:27
Institution:
The University of Manchester
Location:
Manchester, UK
Total pages:
364
Abstract:
Our society increasingly relies on the transmission and reception of vast amounts of data using serial connections featuring ever-increasing bit rates. In imaging systems, for example, the frame rate achievable is often limited by the serial link between camera and host even when modern serial buses with the highest bit rates are used. This thesis documents a scalable embedded transceiver system with a bandwidth and interface standard that can be adapted to suit a particular application. This new approach for a real-time scalable embedded transceiver system is referred to as a Novel Reference Model (NRM), which connects two or more applications through a transceiver network in order to provide real-time data to a host system. Different transceiver interfaces for which the NRM model has been tested include: LVDS, GIGE, PMA-direct, Rapid-IO and XAUI, one support a specific range for transceiver speed that suites a special type for transceiver physical medium. The scalable serial link approach has been extended with loss-less data compression with the aim of further increasing dataflow at a given bit rate. Two lossless compression methods were implemented, based on Huffman coding and a novel method called Reduced Lossless Compression Method (RLCM). Both methods are integrated into the scalable transceivers providing a comprehensive solution for optimal data transmission over a variety of different interfaces. The NRM is implemented on a field programmable gate array (FPGA) using a system architecture that consists of three layers: application, transport and physical. A Terasic DE4 board was used as the main platform for implementing and testing the embedded system, while Quartus-II software and tools were used to design and debug the embedded hardware systems.
Keyword(s):
Thesis main supervisor(s):
Thesis co-supervisor(s):
Degree grantor:
Language:
en

Institutional metadata

University researcher(s):
Academic department(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:310304
Created by:
Mohammed, Rand Basil
Created:
12th August, 2017, 19:28:27
Last modified by:
Mohammed, Rand Basil
Last modified:
13th September, 2018, 14:00:15

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.