Search the site

The University of Manchester Library

In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Deformation of Hexagonal Boron nitride

Alharbi, Abdulaziz Nagi D

[Thesis]. Manchester, UK: The University of Manchester; 2018.

Access to files

Abstract

Boron nitride (BN) materials have unique properties, which has led to interest in them in the last few years. The deformation of boron nitride materials including hexagonal boron nitride, boron nitride nanosheets (BNNSs) and boron nitride nanotubes have been studied by Raman spectroscopy. Both mechanical and liquid exfoliations were employed to obtain boron nitride nanostructures. Boron nitride glass composites were synthesised and prepared in thin films to be deformed by bending test in-situ Raman spectroscopy. Hexagonal boron nitride in the form of an individual flake and as flakes dispersed in glass matrices has been deformed and Raman measurement shows its response to strain. The shift rates were, -4.2 cm-1/%, -6.5 cm-1/% for exfoliated h-BN flake with thick and thin regions and -7.0 cm-1/%, -2.8 cm-1/% for the h-BN flakes in the h-BN/ glass (I) and glass (II) composites. Boron nitride nanosheets (BNNSs) shows a G band Raman peak at 1367.5 cm-1, and the deformation process of BNNSs/ glass composites gives a shift rate of -7.65 cm-1/% for G band. Boron nitride nanotubes (BNNTs) have a Raman peak with position at 1368 cm-1, and their deformation individually and in composites gives Raman band shift rates of -25.7 cm-1/% and -23.6 cm-1/%. Glass matrices shows compressive stresses on boron nitride fillers and this was found as an upshift in the frequencies of G band peak of boron nitride materials. Grüneisen parameters of boron nitride (BN) were used to calculate the residual strains in glass matrices of BNNSs nanocomposites as well as to estimate the band shift rates which found to be in agreement with the experimental shift rate of bulk BN and BNNTs.

Bibliographic metadata

Type of resource:
Content type:
Administered thesis
Form of thesis:
Traditional
Type of submission:
Doctoral level ETD - final
Thesis title:
Deformation of Hexagonal Boron nitride
Degree type:
Doctor of Philosophy
Degree programme:
PhD Materials
Publication date:
2018-10-31T16:15:55
Institution:
The University of Manchester
Location:
Manchester, UK
Total pages:
171
Abstract:
Boron nitride (BN) materials have unique properties, which has led to interest in them in the last few years. The deformation of boron nitride materials including hexagonal boron nitride, boron nitride nanosheets (BNNSs) and boron nitride nanotubes have been studied by Raman spectroscopy. Both mechanical and liquid exfoliations were employed to obtain boron nitride nanostructures. Boron nitride glass composites were synthesised and prepared in thin films to be deformed by bending test in-situ Raman spectroscopy. Hexagonal boron nitride in the form of an individual flake and as flakes dispersed in glass matrices has been deformed and Raman measurement shows its response to strain. The shift rates were, -4.2 cm-1/%, -6.5 cm-1/% for exfoliated h-BN flake with thick and thin regions and -7.0 cm-1/%, -2.8 cm-1/% for the h-BN flakes in the h-BN/ glass (I) and glass (II) composites. Boron nitride nanosheets (BNNSs) shows a G band Raman peak at 1367.5 cm-1, and the deformation process of BNNSs/ glass composites gives a shift rate of -7.65 cm-1/% for G band. Boron nitride nanotubes (BNNTs) have a Raman peak with position at 1368 cm-1, and their deformation individually and in composites gives Raman band shift rates of -25.7 cm-1/% and -23.6 cm-1/%. Glass matrices shows compressive stresses on boron nitride fillers and this was found as an upshift in the frequencies of G band peak of boron nitride materials. Grüneisen parameters of boron nitride (BN) were used to calculate the residual strains in glass matrices of BNNSs nanocomposites as well as to estimate the band shift rates which found to be in agreement with the experimental shift rate of bulk BN and BNNTs.
Keyword(s):
Thesis main supervisor(s):
Thesis co-supervisor(s):
Degree grantor:
Language:
en

Institutional metadata

University researcher(s):
Academic department(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:317073
Created by:
Alharbi, Abdulaziz
Created:
31st October, 2018, 16:15:55
Last modified by:
Alharbi, Abdulaziz
Last modified:
2nd November, 2018, 14:26:39

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.