In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Numerical Investigation of the Behaviour of Circular Synthetic Jets for Effective Flow Separation Control

Zhou, Jue

[Thesis]. Manchester, UK: The University of Manchester; 2010.

Access to files

Abstract

Abstract of thesis entitled "Numerical Investigation of the Behaviour of Circular Synthetic Jets for Effective Flow Separation Control" submitted to the University of Manchester for the degree of Doctor of Philosophy by Jue Zhou in 2010.The stringing regulation on greenhouse gases emissions coupled with the rising fuel price and the growth in aviation transportation have imposed increasing demands on the aircraft industry to develop revolutionary technologies to meet such challenges. Methods of delaying flow separation on aircraft high lift systems have been sought which can lead to an increase in the aircraft performance and ultimately a reduction in aircraft operational costs and its impact on the environment.Synthetic jet actuators are a promising method of delivering flow control for aircraft applications due to their ability to inject momentum to an external flow without net mass flux and their potential in being integrated in MEMS through micro-fabrication with relative ease. It has been demonstrated in many laboratory experiments that synthetic jets are capable of delaying flow separation on aerodynamic bodies of various shapes. However, currently the operating conditions of synthetic jets are mostly chosen by trial-and-error, and thus the flow control effectiveness varies from one experiment to another. In order to deliver an effective flow separation control which achieves a desired control effect at minimum energy expenditure, a better understanding of the fluid mechanics of the behaviour of synthetic jets and the interaction between synthetic jets and a boundary layer are required. The aims of the present research were to achieve such a goal through a series of purposely designed numerical simulations. Firstly, synthetic jets issued from a circular orifice into quiescent air were studied to understand the effect of dimensionless parameters on the formation and the extent of roll-up of vortex rings. The computational results confirmed that the Stokes number determines the strength of vortex roll-up of a synthetic jet. Based on the computational results, a parameter map was produced in which three different operational regimes of synthetic jets were indentified and a criterion for vortex roll-up was also established.A circular synthetic jet issued into a zero-pressure-gradient laminar boundary layer was then investigated. The capability of FLUENT in modelling the key characteristics of synthetic jets was validated using experimental data. The formation and evolution of coherent structures produced by the interaction between synthetic jets and a boundary layer, as well as their near-wall effect in terms of the wall shear stress, were examined. A parameter map illustrating how the appearance of the vortical structures and their corresponding shear stress patterns vary as the synthetic jet operating condition changes was established. In addition, the increase in the wall shear stress relative to the jet-off case was calculated to evaluate their potential separation control effect.Finally, the study moved one step forward to investigate the flow separation control effect of an array of three circular synthetic jets issued into a laminar boundary layer which separates downstream on an inclined plate. The impact of synthetic jets on the boundary layer prior to separation and the extent of flow separation delay on the flap, at a range of synthetic jet operating conditions, were examined and the correlation between them was investigated. Furthermore, the optimal operating conditions for this synthetic jet array in the current study were identified by considering both the flow control effect and the actuator power consumption. The characteristics of the corresponding vortical structures were also examined.The findings from this work have produced some further insights of the behaviour and the interaction between synthetic jets and a boundary layer, which will be useful for ensuring an effective application of synthetic jets in practical settings.

Bibliographic metadata

Type of resource:
Content type:
Form of thesis:
Type of submission:
Degree type:
Doctor of Philosophy
Degree programme:
PhD Aeronautical Engineering
Publication date:
Location:
Manchester, UK
Total pages:
293
Abstract:
Abstract of thesis entitled "Numerical Investigation of the Behaviour of Circular Synthetic Jets for Effective Flow Separation Control" submitted to the University of Manchester for the degree of Doctor of Philosophy by Jue Zhou in 2010.The stringing regulation on greenhouse gases emissions coupled with the rising fuel price and the growth in aviation transportation have imposed increasing demands on the aircraft industry to develop revolutionary technologies to meet such challenges. Methods of delaying flow separation on aircraft high lift systems have been sought which can lead to an increase in the aircraft performance and ultimately a reduction in aircraft operational costs and its impact on the environment.Synthetic jet actuators are a promising method of delivering flow control for aircraft applications due to their ability to inject momentum to an external flow without net mass flux and their potential in being integrated in MEMS through micro-fabrication with relative ease. It has been demonstrated in many laboratory experiments that synthetic jets are capable of delaying flow separation on aerodynamic bodies of various shapes. However, currently the operating conditions of synthetic jets are mostly chosen by trial-and-error, and thus the flow control effectiveness varies from one experiment to another. In order to deliver an effective flow separation control which achieves a desired control effect at minimum energy expenditure, a better understanding of the fluid mechanics of the behaviour of synthetic jets and the interaction between synthetic jets and a boundary layer are required. The aims of the present research were to achieve such a goal through a series of purposely designed numerical simulations. Firstly, synthetic jets issued from a circular orifice into quiescent air were studied to understand the effect of dimensionless parameters on the formation and the extent of roll-up of vortex rings. The computational results confirmed that the Stokes number determines the strength of vortex roll-up of a synthetic jet. Based on the computational results, a parameter map was produced in which three different operational regimes of synthetic jets were indentified and a criterion for vortex roll-up was also established.A circular synthetic jet issued into a zero-pressure-gradient laminar boundary layer was then investigated. The capability of FLUENT in modelling the key characteristics of synthetic jets was validated using experimental data. The formation and evolution of coherent structures produced by the interaction between synthetic jets and a boundary layer, as well as their near-wall effect in terms of the wall shear stress, were examined. A parameter map illustrating how the appearance of the vortical structures and their corresponding shear stress patterns vary as the synthetic jet operating condition changes was established. In addition, the increase in the wall shear stress relative to the jet-off case was calculated to evaluate their potential separation control effect.Finally, the study moved one step forward to investigate the flow separation control effect of an array of three circular synthetic jets issued into a laminar boundary layer which separates downstream on an inclined plate. The impact of synthetic jets on the boundary layer prior to separation and the extent of flow separation delay on the flap, at a range of synthetic jet operating conditions, were examined and the correlation between them was investigated. Furthermore, the optimal operating conditions for this synthetic jet array in the current study were identified by considering both the flow control effect and the actuator power consumption. The characteristics of the corresponding vortical structures were also examined.The findings from this work have produced some further insights of the behaviour and the interaction between synthetic jets and a boundary layer, which will be useful for ensuring an effective application of synthetic jets in practical settings.
Thesis main supervisor(s):
Language:
en

Institutional metadata

University researcher(s):

Record metadata

Manchester eScholar ID:
uk-ac-man-scw:96786
Created by:
Zhou, Jue
Created:
1st December, 2010, 12:28:02
Last modified by:
Zhou, Jue
Last modified:
17th May, 2012, 18:32:58

Can we help?

The library chat service will be available from 11am-3pm Monday to Friday (excluding Bank Holidays). You can also email your enquiry to us.