Prof Michael Preuss - publications

2012

• G.C. Obasi, S. Birosca, J. Quinta da Fonseca, M. Preuss. Effect of β grain growth on variant selection and texture memory effect during α → β → α phase transformation in Ti–6Al–4V. Acta Materialia. 2012 February; 60(3): 1048-1058. eScholarID:144464 | DOI:doi:10.1016/j.actamat.2011.10.038
• 58. G. C Obasi, a, R. J. Moat, D. G. Leo Prakash, W. Kockelmann, J. Quinta da Fonseca and M. Preuss. In situ observation on the influence of β Grain growth on Texture Evolution during Phase Transformation in Ti-6A-4V. Materials Science Forum. 2012; 702-703: 854-857. eScholarID:138080 | DOI:10.4028/www.scientific.net/MSF.702- 703.854
• Peter Honniball, Michael Preuss, João Quinta da Fonseca. Influence of temperature upon the texture evolution and mechanical behaviour of Zircaloy-4. Materials Science Forum. 2012; 702-703: 834-837. eScholarID:138079 | DOI:10.4028/www.scientific.net/MSF.702- 703.834
• 4. O. Zanellato, M. Preuss, J.-Y. Buffiere, F. Ribeiro, A. Steuwer, J. Desquines, J. Andrieux, B. Krebs. Synchrotron diffraction study of dissolution and precipitation kinetics of hydrides in Zircaloy-4. Journal of Nuclear Materials. 2012 January; 420(1-3): 537-547. eScholarID:144407 | DOI:doi:10.1016/j.jnucmat.2011.11.009

2011

• 55. W. Li, P.J. Withers, M. Preuss, J. Shackleton, P. Andrews. Depth and lateral variation of machining-induced residual stress for a nickel base superalloy. Switzerland: Trans Tech Publications: 2011: 332-339. eScholarID:120052
• 3. M.M. Attallah, H. Terasaki, R.J. Moat, S.E. Bray, Y. Komizo, M. Preuss. In-Situ observation of primary gamma prime melting in Ni-base superalloy using confocal laser scanning microscopy. Materials Characterization. 2011; 62: 760-767. eScholarID:124070 | DOI:10.1016/j.matchar.2011.05.001
• I. Bhamji, M Preuss, P.L. Threadgill, A.C. Addison. Solid state joining of metals by linear friction welding: a literature review. Materials Science and Technology. 2011 January; 27(1): 2-12. eScholarID:144461 | DOI:DOI: 10.1179/026708310X520510
• B.M.B. Grant, E. Knoche, M. Preuss, J. Quinta da Fonseca, M.R. Daymond. The Effect of Lattice Misfit on Deformation Mechanisms at High Temperature. Euro Superalloys 2010. Advanced Materials Research, Vol. 278, 2011: 2011: 144-149. eScholarID:126088
• M. Karadge, B. Grant, P. J. Withers, G. Baxter and M. Preuss. Thermal Relaxation of Residual Stresses in Nickel-Based Superalloy Inertia Friction Welds. Metallurgical and Materials Transaction A. 2011; 42(8): 2301-2311. eScholarID:124639 | DOI:10.1007/s11661-011-0613-3

2010

• D.G. Leo Prakash, R. Ding, R.J. Moat, I. Jones, P.J. Withers, J. Quinta da Fonseca, M. Preuss. Deformation twinning in Ti-6Al-4 V during low strain rate deformation to moderate strains at room temperature. Materials Science and Engineering: A. 2010 August; 527(21-22): 5734-5744. eScholarID:101052 | DOI:10.1016/j.msea.2010.05.039
• M. Preuss. New metallic materials for aeroengines - or understanding what we use today. 2010 Engine Yearbook. 2010: eScholarID:67584
• P.J. Withers and M. Preuss. Simulation of joining operations A: Rotational welding. In: D.U. Furrer and S.L. Semiatin, ed. ASM International Handbook Vol. 22. 2010: eScholarID:67582

2009

• S. Birosca, F. A. Garcia-Pastor, M. Karadge, J-Y. Buffiere and M. Preuss. 3D Characterisation of Short Fatigue Crack in Ti 6246. ICF 12,2009 proceedings, 12th International Conference on Fracture, T12.008 Fatigue. 2009: -. eScholarID:67235
• J. Romero, M. Preuss, J. Quinta da Fonseca. Capturing the texture changes in a zirconium alloy during the allotropic phase transformation. Scripta Materialia. 2009; 61(4): 399-408. eScholarID:40526 | DOI:10.1016/j.scriptamat.2009.04.031
• P. Frankel, M. Preuss, A. Steuwer, P.J. Withers, S. Bray. Comparison of residual stresses in Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo linear friction welds. Materials Science and Technology. 2009; 25(5): 640-650. eScholarID:40511 | DOI:10.1179/174328408X332825
• R.J. Moat, A.J. Pinkerton, L. Li, P.J. Withers, M. Preuss. Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy. Acta Materialia. 2009; 57(4): 1220-1229. eScholarID:40313 | DOI:10.1016/j.actamat.2008.11.004
• J. Romero, M.M. Attallah, M. Preuss, M. Karadge, S.E. Bray. Effect of the forging pressure on the microstructure and residual stress development in Ti-6Al-4V linear friction welds. Acta Materialia. 2009 October; 57(18): 5582-5592. eScholarID:40615 | DOI:10.1016/j.actamat.2009.07.055
• A. Steuwer, J.R. Santisteban, M. Preuss, M.J. Peel, T. Buslaps and M. Harada. Evidence of stress-induced hydrogen ordering in zirconium hydrides. Acta Materialia. 2009; 57(1): 145-152. eScholarID:40265 | DOI:DOI: 10.1016/j.actamat.2008.08.061
• B. Grant, M. Preuss, P.J. Withers, G. Baxter, M. Rowlson. Finite element process modelling of inertia friction welding advanced nickel-based superalloy. Materials Science and Engineering a. 2009; (513-514): 366-375. eScholarID:40462 | DOI:10.1016/j.msea.2009.02.005
• A M Korsunsky, G M Regino, D Nowell, M Karadge, B Grant, P J Withers, M Preuss, G Baxter. Inertia friction welds between nickel superalloy components: analysis of residual stress by eigenstrain distributions. The Journal of Strain Analysis for Engineering Design. 2009; 44(2): 159-170. eScholarID:40443 | DOI:10.1243/03093247JSA438
• W. Li, P.J. Withers, D. Axinte, M. Preuss, P. Andrews. Residual stresses in face finish turning of high strength nickel-based superalloy. Journal of Materials Processing Technology. 2009; 209(10): 4896-4902. eScholarID:40577 | DOI:10.1016/j.jmatprotec.2009.01.012
• J. Romero, M. Preuss, J. Quinta da Fonseca. Texture memory and variant selection during phase transformation of a zirconium alloy. Acta Materialia. 2009 October; 57(18): 5501-5511. eScholarID:40641 | DOI:10.1016/j.actamat.2009.07.046
• E. Polatidis, P.G. Frankel, M. Preuss. The effect of residual stress on growth of oxide scale on zirconium alloys. On CD: N/A: 2009: -. eScholarID:67230
• S. Birosca, J.Y. Buffiere, F.A. Garcia-Pastor, M. Karadge, L. Babout, M. Preuss. Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction. Acta Materialia. 2009 September; eScholarID:40651 | DOI:10.1016/j.actamat.2009.08.009

2008

• R.J. Mitchell, M. Preuss, S. Tin and M.C. Hardy. The influence of cooling rate from temperatures above the γ′ solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys. Materials Science and Engineering a. 2008; 473(1-2): 158-165. eScholarID:40219 | DOI:10.1016/j.msea.2007.04.098
• Karadge M, Preuss M, Withers P, Bray S. Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 2008 September; 491(1-2): 446-453. eScholarID:1f258 | DOI:10.1016/j.msea.2008.04.064
• Moat R, Karadge M, Preuss M, Bray S, Rawson M. Phase transformations across high strength dissimilar steel inertia friction weld. Journal of Materials Processing Technology. 2008 August; 204(1-3): 48-58. eScholarID:1f188 | DOI:10.1016/j.jmatprotec.2007.10.074
• Preuss, M, J Q da Fonseca, B Grant, E Knoche, R Moat, and M Daymond. The effect of gamma ' particle size on the deformation mechanism in an advanced polycrystalline nickel-base superalloy. 11th International Symposium on Superalloys. Minerals, Metals & Materials Soc: 2008: 405-414. eScholarID:2f27

2007

• A. Steuwer, M. Dumont, M. Peel, M. Preuss and P.J. Withers: The variation of the unstrained lattice parameter in an AA7010 friction stir weld, Acta Materialia, 55 (12), 2007, 4111-4120.
• PREUSS M; M.R. DAYMOND; B. CLAUSEN. Evidence of variation in slip mode in a polycrystalline nickel-base superalloy with change in temperature from neutron diffraction strain measurements. Acta Materialia. 2007 March; 55(9): 3089-3102. eScholarID:1a9844 | DOI:10.1016/j.actamat.2007.01.013
• R.J. Mitchell, M. Preuss, and M.J. Hardy: Inter-relationships between composition, , morphology, hardness, and - mismatch in advanced polycrystalline nickel-base superalloys during aging at 800 C, Metallurgical and Materials Transactions A, 38A (3), 2007, 615-627.
• PREUSS M; M. KARADGE; C. LOVELL; P.J. WITHERS; . Texture development in Ti-6Al-4V linear friction welds. Materials Science & Engineering - A. 2007 January; 459(1-2): 182-191. eScholarID:1a9843 | DOI:10.1016/j.msea.2006.12.095
• Huang Z, Li H, Preuss M, Karadge M, Bowen P, Bray S, Baxter G. Inertia friction welding dissimilar nickel-based superalloys alloy 720Li to IN718. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 2007 July; 38A(7): 1608-1620. eScholarID:1f676 | DOI:10.1007/s11661-007-9194-6
• Karadge M, Preuss M, Lovell C, Withers P, Bray S. Texture development in Ti-6Al-4V linear friction welds. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 2007 June; 459(1-2): 182-191. eScholarID:1f668 | DOI:10.1016/j.msea.2006.12.095
• Withers P, Preuss M, Steuwer A, Pang J. Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress. Journal of Applied Crystallography. 2007 October; 40: 891-904. eScholarID:1f534 | DOI:10.1107/s0021889807030269

2006

• PREUSS M; R.J. MITCHELL; M.C. HARDY; S. TIN. Influence of composition and cooling rate on constrained and unconstrained lattice parameters in advanced polycrystalline nickel-base superalloys. Materials Science and Engineering - A. 2006 April; 423(1-2): 282-291. eScholarID:1a9846 | DOI:10.1016/j.msea.2006.02.039
• L. Wang, M. Preuss, P.J. Wither, G.J. Baxter, P. Wilson. Residual stress prediction for the inertia welding process. Journal of Neutron Research. 2006; 12(1-3): 6. eScholarID:67204

2004

• M. Preuss, J. Quinta da Fonseca, I. Kyriakoglou, P.J. Withers, G.J. Baxter. Characterisation of Gamma-Prime across inertia friction welded Alloy 720Li. Superalloy 2004. 2004: 477-484. eScholarID:67522
• R.J. Mitchell, M. Preuss, S. Tin. Development of γ’ morphology in P/M rotor disc alloys during heat treating. 10th int. Symposium on Superalloys. 2004: 361-370. eScholarID:67525
• L. Babout, J. Quinta da Fonseca, M. Preuss. Local Strain Imaging during Mechanical Loading of Lamellar Microstructures in Titanium Based Alloys. Applied Mechanics and Materials, Vols.1-2. 2004: 159-164. eScholarID:67530
• J. Quinta da Fonseca, M. Preuss, P. Ryan, P.J. Withers. Mechanical Property Mapping Using Image Correlation and Electronic Speckle. Applied Mechanics and Materials, Vols.1-2. 2004: 147-152. eScholarID:67529
• A. King, A.D. Evans, M. Preuss, P.J. Withers, C. Woodward. Study of residual stress introduced by laser shock peening in wide chord fan blades by neutron and synchrotron diffraction. Journal of Neutron Research. 2004; 12(1-3): 6. eScholarID:67220

2003

• PREUSS M; PEEL M; STEUWER A; WITHERS PJ. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Materialia. 2003 July; 51(16): 4791-4801. eScholarID:1a9845 | DOI:10.1016/S1359-6454(03)00319-7
• A. King, A. Evans, M. Preuss and P.J. Withers. Residual stresses in fatigued Ti-6Al-4V fan blade roots. 2003: 2801-2808. eScholarID:67534
• M. Preuss, J. Fonseca, L. Wang, P.J. Withers and S. Bray. Residual stresses in linear friction welded IMI550. 2003: 2745-2752. eScholarID:67532
• M. Preuss, A. Steuwer, P.J. Withers, G.J. Baxter and S. Bray. The development of residual stresses in inertia welding of dissimilar nickel-based superalloys. 2003: 886-890. eScholarID:67546
• N.M. Solis, D. Hu, M.H. Loretto, W. Voice, M. Preuss, P.J. Withers, X.H. Wu. The influence of microstructure and residual stress on pre-yield cracking in TiAl-based alloys. Materials Science Forum. 2003: 1655-1659. eScholarID:67531

2002

• M. Preuss, J.W.L. Pang, P.J. Withers, G.J. Baxter. Inertia Welding Nickel-based Superalloy, Part I: Metallurgical Characterization. Metallurgical and Materials Transactions. 2002; A(33A): 110. eScholarID:67222
• M. Preuss, J.W.L. Pang, P.J. Withers, G.J. Baxter. Inertia Welding Nickel-based Superalloy, Part II: Residual Stress Characterization. Metallurgical and Materials Transactions. 2002; A(33A): 107. eScholarID:67228
• M. Preuss, G. Rauchs, P.J. Withers, E. Maire, J.-Y. Buffiere. PCM. 2002: 1381-1385. eScholarID:67580
• P.J. Withers, M. Preuss, P.J. Webster , D.J. Hughes and A.M. Korsunsky. Residual Strain Measurement by Synchrotron Diffraction. Materials Science Forum Vols. 404-407. 2002: 1-12. eScholarID:67579
• M. Ceretti, C. Fermon, A. Magerl, M. Preuss, P.J. Withers. The European Spallation Source Project. The European Spallation Source Project, Volume II, New Science &Technology for the 21st century. 2002: 55-64. eScholarID:67559

2000

• J.W.L. Pang, M. Preuss, G.J. Baxter and P.J. Withers. The development of residual stresses in inertia friction welding of Ni Superalloys. 2000: 1415-1424. eScholarID:67581