Dr Paul Mativenga (Beng, MSc, PhD, IET, CIRP) - publications

Unknown

• M Fahad, P T Mativenga and M A Sheikh. An investigation of multilayer coated (TiCN/Al2O3-TiN) tungsten carbide tools in high speed cutting using a hybrid finite element and experimental technique. In-press eScholarID:148842
• Mian A.J, Driver N., and Mativenga P.T. Estimation of minimum chip thickness in micro milling using acoustic emission. Proceedings of the Institution of Mechanical engineers, Part B: Journal of Engineering Manufacture. In-press eScholarID:148858
• Imran M, Mativenga P T, Gholinia A, Withers P J. Evaluation of surface integrity in micro drilling process for nickel-based alloy. International Journal of Advanced Manufacturing Technology. In-press eScholarID:107571
• Imran M, Mativenga P, Kannan S Evaluation of the effects of tool geometry on tool wear and surface integrity in the micro drilling process for Inconel 718 alloy. International Journal of Machining and Machinability of Materials. In-press eScholarID:148855
• M. Fahad, P.T. Mativenga and M.A.Sheikh. Investigation of multilayer coated (TiCN/Al2O3-TiN) tungsten carbide tools in high speed cutting using a hybrid finite element and experimental technique. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. In-press eScholarID:148860
• Okasha M M, Mativenga P T, Li L. Mechanical micro drilling of negative tapered laser predrilled holes: A new approach for burr minimization. International Journal of Advanced Manufacturing Technology. In-press eScholarID:148844
• Yang S, Cooke K, Aramcharoen A, Mativenga P T, Teer D. Micro-tool Coatings Using Magnetron Sputtering. Materials Technology: Advanced Performance Materials. In-press eScholarID:107574
• Okasha M M, Mativenga P T, Li L. Sequential Laser Mechanical Micro-Drilling of Inconel 718 Allo. Transactions of the ASME, Journal of Manufacturing Science and Engineering. In-press eScholarID:107568
• Okasha M M, Mativenga P T, Li L. Sequential Laser Mechanical Micro-Drilling of Inconel 718 Alloy. Transactions of the ASME, Journal of Manufacturing Science and Engineering. In-press eScholarID:148852
• Jaffery, S.I. and P.T. Mativenga. Wear mechanisms analysis for turning Ti-6Al-4V – Towards the development of suitable tool coatings. The International Journal of Advanced Manufacturing Technology. In-press eScholarID:148856

In P

• Aramcharoen A, Mativenga P. Evaluation of critical parameters in micro machining of hardened tool steel. International Journal of Nanomanufacturing (IJNM). In-press eScholarID:1e730
• Aramcharoen A, Mativenga P. Size Effect and Tool Geometry in Micro Milling of Tool. Precision Engineering. In-press eScholarID:1e688
• Jaffery S, Mativenga P. A study of the use of wear maps for assessing machining performance. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. In-press eScholarID:1e827
• Marimuthu S, Mativenga P, Li L, Crouse P. Laser removal of TiN from coated carbide substrate. International Journal of Advanced Manufacturing Technology. In-press eScholarID:1e828

2012

• Paul T Mativenga and Ampara Aramcharoen. Micro Tooling Design and Manufacturing. In: Kai Cheng, ed. Micro Cutting: Fundamentals and Applications - Microsystem and Nanotechnology Series. Wiley-Blackwell (an imprint of John Wiley & Sons Ltd).2012: eScholarID:151252

2011

• M Fahad, P T Mativenga and M A Sheikh. A comparative study of multilayer and functionally graded coated tools in high speed machining. International Journal of Advanced Manufacturing Technology. In-press eScholarID:148839 | DOI:10.1007/s00170-011-3780-x
• Mativenga P T and Rajemi M F. Calculation of optimum cutting parameters based on minimum energy footpr. CIRP Annals - Manufacturing Technology. Elsevier: 2011: 149-152-152. eScholarID:148861
• Mativenga P T and Rajemi M F. Calculation of optimum cutting parameters based on minimum energy footprint. CIRP Annals - Manufacturing Technology. 2011 August; 60(1): 149-152-152. eScholarID:148850 | DOI:10.1016/j.cirp.2011.03.088
• Mian A.J., Driver N., and Mativenga P.T Chip formation in micro-scale milling and correlation with acoustic emission signal. International Journal of Machine Tools and Manufacture. 2011 May; 51(5): 383-394-394. eScholarID:148851
• Imran M, Mativenga P T, Gholinia A, Withers P J. Evaluation of surface integrity in micro drilling process for nickel-based alloy. The International Journal of Advanced Manufacturing Technology. 2011; 55(5-8): 465-476-476. eScholarID:148853
• Mian A.J., Driver N., and Mativenga P.T Identification of factors that dominate “size effect” in micro machining. The International Journal of Machine Tools and Manufacture. 2011 May; 51(5): 383-394-394. eScholarID:148848
• Yang S, Cooke K, Aramcharoen A, Mativenga P T, Teer D. Micro-tool Coatings Using Magnetron Sputtering. Materials Technology: Advanced Performance Materials. 2011 February; 26(1): 20-24(5)-24(5). eScholarID:148854
• Akbar F, Mativenga P T, Sheikh M A, Kishawy H. Modelling of Heat Partition in High-Speed Machining using Uncoated and Coated Tools. 2011: -. eScholarID:117771

2010

• Mian A, Driver N, Mativenga P T. A comparative study of material phase effects on micro-machinability of multiphase materials. International Journal of Advanced Manufacturing Technology. 2010; 50(1-4): 163-174. eScholarID:107579 | DOI:DOI: 10.1007/s00170-009-2506-9
• Akbar F, Mativenga P T, Sheikh M A. An Experimental and Coupled Thermo-mechanical Finite Element Study of Heat Partition Effects in Machining. International Journal of Advanced Manufacturing Technology. 2010; 46(5): 491-507-507. eScholarID:107755 | DOI:10.1007/s00170-009-2117-5
• Imran M, Mativenga P T, Kannan S. An Investigation into the Effects of Tool Geometry in Micro Drilling Process for Nickel Based Superalloy. 2010: -. eScholarID:117779
• Jaffery S I, Driver N, Mativenga P T. Analysis of process parameters in the micromachining of Ti-6Al-4V alloy. 36th International MATADOR conference. 2010: -. eScholarID:107795
• F. Akbar, P. T. Mativenga, M. A. Sheikh. Chapter 2. Prediction of heat partition in metal cutting – a state-of-the-art. Review of conventional to high-speed machining. In: Materials and Manufacturing Technology (J. Paulo Davim, Univ. of Aveiro - Series Editor), ed. Metal Cutting: Research Advances. Nova Science Publishers.2010: eScholarID:151247
• Mian A.J, Driver N., and Mativenga P.T. Chip formation in micro-scale milling and correlation with acoustic emission signal. International Journal of Advanced Manufacturing Technology. In-press eScholarID:107565
• Mativenga P T, Rajemi M, Marimuthu S, Li L, Yang S, Cooke K. Establishing a basis for sustainable re-use of cutting tools through laser decoating. Journal of Machine Engineering. 2010; 10(2): 36-47. eScholarID:107742
• Mativenga P T, Rajemi M F, Marimuthu S, Li L, Yang S, Cooke C. Establishing a basis for sustainable re-use of cutting tools through laser decoating. 2010: -. eScholarID:117775
• Mian A., Driver N., Mativenga P. T. Estimation of minimum chip thickness for multi-phase steel using acoustic emission signals. 2010: -. eScholarID:117774
• Muhammad Fahad, Paul T. Mativenga and Mohammad A. Sheikh. Finite Element Modeling of HSM with Coated Tools. In: J. Paulo Davim, University of Aveiro, Portugal, ed. Finite Element Method in Manufacturing Processes. Wiley.2010: eScholarID:151241
• Mian A.J, Driver N., and Mativenga P.T. Identification of factors that dominate “size effect” in micro machining. International Journal of Machine Tools and Manufacture. In-press eScholarID:107560
• Okasha M, Sezer HK, Mativenga P T, Li L. Laser Drilling of Nickel Alloy: Effect of Process Gases on Quality and Drilling Time. 2010: -. eScholarID:117777
• Marimuthu S, Kamara A M, Whitehead D, Mativenga P T, Li L. 2010. Laser Removal of TiN Coatings from WC Micro-tools and In-process Monitoring. Optics & Laser Technology. 2010; 42(8): 1233-1239-1239. eScholarID:107738 | DOI:10.1016/j.optlastec.2010.03.016
• J8. Negarestani R, Sundar M, Sheikh M A, Mativenga P T, Li L, Li Z L, Chu P L, Khin C C, Zheng H Y, Lim G C. Numerical Simulation of Laser Machining of Carbon Fibre Reinforced Composites. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2010; 24(7): 1017-1027. eScholarID:107607
• Okasha M M, Mativenga P T, Driver N, Li L. Sequential laser and mechanical micro-drilling of Ni super-alloy for aerospace application. CIRP Annals - Manufacturing Technology. 2010; 59(1): 199-202-202. eScholarID:107759 | DOI:10.1016/j.cirp.2010.03.011
• Okasha M, Driver N, Li L, Mativenga P T. Sequential laser and mechanical micro-drilling of Ni super-alloy for aerospace application. CIRP: 2010: -. eScholarID:117773
• Rajemi M.F., Mativenga P T, Aramcharoen A. Sustainable Machining: Selection of Optimum Turning Conditions Based on Minimum Energy Considerations. Journal of Cleaner Production. 2010; (18): 1059-1065-1065. eScholarID:107605 | DOI:10.1016/j.jclepro.2010.01.025
• Marimuthu S, Kamara A, Mativenga P T, Li L. Synthesis of TiAlN based coating on mild steel substrate using combined laser/sol-gel technique. Surface and Coatings Technology. 2010; 2004(16-17): 2539-2545-2545. eScholarID:107750 | DOI:10.1016/j.surfcoat.2010.01.037

2009

• Jaffery S I, Mativenga P T. A study of the use of wear maps for assessing machining performance. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2009; 223(9): 1097-1105-1105. eScholarID:107771 | DOI:10.1243/09544054JEM1462
• Jaffery I M, Mativenga P T. A study of the use of wear maps for assessing machining performance. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2009; 223(9): 1097-1105. eScholarID:107787 | DOI:10.1243/09544054JEM1462
• Aramcharoen A, Mativenga P T. Evaluation of critical parameters in micro machining of hardened tool steel. International Journal of Nanomanufacturing (IJNM). 2009; 3(1): 100-111. eScholarID:107779 | DOI:10.1504/IJNM.2009.027053
• Marimuthu S, Whitehead D, Mativenga P T, Li L. Laser Monitoring of TiN Decoating Process to Facilitate Optimum Removal. 2009: -. eScholarID:118090
• Marimuthu S, Mativenga P T, Li L, Crouse P L. Laser removal of TiN from coated carbide substrate. International Journal of Advanced Manufacturing Technology. 2009; 45(11-12): 1169-1178. eScholarID:107785 | DOI:10.1007/s00170-009-2059-y
• Abukhshim N, Nisar S, Sheikh M A, Mativenga P T. Machining of Heavy Tungsten Alloy with Ceramic and Coated Carbide Tools. 2009: -. eScholarID:117782
• Yang S, Cooke K, Aramcharoen A, Mativenga P T, Teer D. Micro-tool Coatings Using Magnetron Sputtering. 2009: -. eScholarID:117785
• Aramcharoen A, Mativenga P T. Size Effect and Tool Geometry in Micro Milling of Tool. Precision Engineering. 2009; 33(4): 402-407. eScholarID:107776 | DOI:10.1016/j.precisioneng.2008.11.002
• Rajemi M F, Mativenga P T, Jaffery M I. and carbon footprint analyis for machining titanium Ti-6Al-4V alloy. 2009: -. eScholarID:118086
• Abukhshim N, Mativenga P, Sheikh M. An Evaluation of Tool-Chip Contact Phenomena and Tool Wear in High Speed Machining. Journal of Manufacturing Technology Research. 2009; 1(1/2): eScholarID:1e757
• Akbar F, Mativenga P, Sheikh M. On the Heat Partition Properties of TiAlN compared to TiN coating in High Speed Machining. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2009; 223: 363-375. eScholarID:1e732 | DOI:10.1243/09544054JEM1365
• Akbar F, Mativenga P, Sheikh M. Predictive Modelling of Average Heat Partition in High Speed Machining of AISI/SAE 4140 steel. International Journal of Machining and Machinability Materials. 2009; 5: 135-154. eScholarID:1e641 | DOI:10.1504/IJMMM.2009.023388
• Iqbal S, Mativenga P, Sheikh M. A comparative study of the tool chip contact length in turning of two engineering alloys. International Journal of Advanced Manufacturing Technology. In-press42(1-2): 30-40. eScholarID:1e639 | DOI:10.1007/s00170-008-1582-6
• Marimuthu S, Whitehead D, Mativenga P, Li L, Yang S, Cooke K. Excimer Laser Decoating of Chromium Titanium Aluminium Nitride to Facilitate Re-use of Cutting Tools. Optics & Laser Technology. 2009 August; 41(8): 934-944. eScholarID:1e829
• Marimuthu, Sundar, David Whitehead, Paul Mativenga, and Lin Li. Laser Monitoring of TiN Decoating Process to Facilitate Optimum Removal. Lamdamap. 2009: 387-396. eScholarID:2e1069
• Mian A, Mativenga P. Micromachining of coarse grained multi-phase material. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2009; 223: 377-385. eScholarID:1e733 | DOI:10.1243/09544054JEM1185
• Rajemi, M F, Paul Mativenga, and M I Jaffery. Energy and carbon footprint analyis for machining titanium Ti-6Al-4V alloy. CIRP XX Conference on Supervising and Diagnostics of Machining Systems. 2009: eScholarID:2e1044
• Rajemi M, Mativenga P, Jaffery S. Energy and carbon footprint analyis for machining titanium Ti-6Al-4V alloy in High Performance Manufacturing Processes. Journal of Machine Engineering. 2009; 9: 103-112. eScholarID:1e826

2008

• Akbar F, Mativenga P, Sheikh M. An Evaluation of Heat Partition in High Speed Turning of AISI/SAE 4140 Steel with Uncoated and TiN Coated Tools. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2008; 222: 759-771. eScholarID:1e594 | DOI:10.1243/09544054JEM1072
• Akbar, F, Paul Mativenga, and Mohammad Sheikh. An evaluation of heat partition models in high speed machining of AISI/SAE 4140 steel. 6th International Conference on Manufacturing Research (ICMR08). 2008: eScholarID:2e951
• Aramcharoen A, Mativenga P. Evaluation and selection of hard coatings for micro milling of hardened tool steel. International Journal of Machine Tools and Manufacture. 2008; 48: 1578-1584. eScholarID:1e640 | DOI:10.1016/j.ijmachtools.2008.05.011
• Aramcharoen, A, and Paul Mativenga. Evaluation of Critical Parameters in Micro Machining of Hardened Tool Steel. The 6th International Conference on Manufacturing Research (ICMR08), Brunel University, UK. 2008: eScholarID:2e867
• Aramcharoen, A, and Paul Mativenga. Tool wear modes in micro/mesoscale milling of hardened die steel. 3rd International Conference on High Performance Cutting, Dublin, Ireland, 12-13 June 2008. 2008: 179-188. eScholarID:2e847
• Aramcharoen A, Mativenga P. White layer formation and hardening effects in hard turning of H13 tool steel with CrTiAlN and CrTiAlN/MoST-coated carbide tools. International Journal of Advanced Manufacturing Technology. 2008; 36: 650-657. eScholarID:1e312 | DOI:10.1007/s00170-006-0899-2
• Imran M, Mativenga P, Kannan S, Novovic D. An Experimental Investigation of Deep-Hole Micro Drilling Capability for a Nickel Based Super Alloy. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2008; 222: 1589-1596. eScholarID:1e708 | DOI:10.1243/09544054JEM1217
• Iqbal, S A, Paul Mativenga, and Mohammad Sheikh. A sensitivity study of the effects of interface heat transfer coefficient on FE modelling of machining process for a wide range of cutting speeds. 6th International Conference on Manufacturing Research (ICMR08). 2008: eScholarID:2e950
• Iqbal S, Mativenga P, Sheikh M. An investigative study of the interface heat transfer coefficient for FE modelling. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2008; 222: 1405-1416. eScholarID:1e647 | DOI:10.1243/09544054JEM1179
• Iqbal S, Mativenga P, Sheikh M. Contact length prediction: Mathematical models and effect of friction schemes on FEM for conventional to HSM of AISI1045 steel. International Journal of Machining and Machinability Materials. 2008; 3: 18-33. eScholarID:1e481 | DOI:10.1504/IJMMM.2008.017622
• Jaffery I, Mativenga P. Assessment of the machinability of Ti-6Al-4V Alloy using the Wear Map Approach. International Journal of Advanced Manufacturing Technology. 2008; 40: 687-696. eScholarID:1e536 | DOI:10.1007/s00170-008-1393-9
• Li, Lin, Paul Mativenga, and Sundar Marimuthu. Laser Stripping of CrTiAIN Coating to Facilitate Reuse of Cutting Tools. 27th International Congress on Applications of Lasers & Electro-Optics (ICALEO) Temecular, CA, USA, Publ by Laser Institute of America. 2008: eScholarID:2e952
• Li, ZL, PL Chu, HY Zheng, GC Lim, Lin Li, Sundar Marimuthu, R Nagarestani, Mohammad Sheikh, and Paul Mativenga. Process development of laser machining of carbon fibre reinfoenced plastic composites. 27th International Congress on Appications of Lasers and Electro-Optics (ICALEO08), Temecular, CA, USA, Publ by Laser Institute of America. 2008: eScholarID:2e1009
• Marimuthu, Sundar, P Crouse, Paul Mativenga, and Lin Li. Synthesis and Coating of AlN on mild steel by combined laser and sol-gel technique. Proceedings of 3rd Pacific International Conference on Applications of Lasers and Optoelectronics (PICALO08), Laser Institute of America, Beijing, China. 2008: eScholarID:2e887
• Rajemi, M, and Paul Mativenga. Machinability Analysis from Energy Footprint Considerations. XIX Workshop on Supervising and Diagnostics of Machining Systems, Karpacz, 17th - 20th March 2008, POLAND. 2008: eScholarID:2e788
• Rajemi M, Mativenga P. Machinability analysis from energy footprint considerations, in INTELIGENT MANUFACTURING FOR INDUSTRIAL BUSINESS PROCESSES. Journal of Machine Engineering. 2008 March; 8: 106-113. eScholarID:1e608

2007

• Akbar, F, Paul Mativenga, and Mohammad Sheikh. An investigation of tool-chip interface temperature and heat partition in high speed machining of AISI/SAE 4140 steel with TiN coated tool. 35th International MATADOR Conference. 2007: 215-218. eScholarID:2e537
• Aramcharoen, A, and Paul Mativenga. The contribution of CriTiAlN Coatings in Micro Milling of Hardened Die stee. 40th CIRP International seminar on Manufacturing systems. 2007: eScholarID:2e536
• Aramcharoen, A, Paul Mativenga, and S Yang. The effect of AlCrTiN coatings on product quality in micro milling of 45 HRC hardened H13 die steel. 35th INTERNATIONAL MATADOR CONFERENCE, TAIPEI. 2007: 203-206. eScholarID:2e538
• Iqbal S, Mativenga P, Sheikh M. Characterization of the Machining of AISI 1045 Steel over a wide range of Cutting Speeds-Part 1: Investigation of Contact Phenomenon. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2007; (221): 909-916. eScholarID:1e140
• Iqbal S, Mativenga P, Sheikh M. Characterization of the Machining of AISI 1045 Steel over a wide range of Cutting Speeds-Part 2: Evaluation of Flow Stress Models and Interface Friction Distribution Schemes. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2007; (221): 917-926. eScholarID:1e141
• Mativenga P, Mubashar A. White layer formation and tool wear in high speed milling of 57HRc tool steel using coated and uncoated tools. International Journal of Agile Systems and Management. 2007; 2(2): 172 - 185. eScholarID:1e367

2006

• Abukhshim, N A, Paul Mativenga, and Mohammad Sheikh. Tool-Chip Contact Phenomena and Heat Generation for TiAlN, CrTiAlN, TiAlN/MoST PVD Coatings in HSM of High Strength Alloy Steel. 5th International Conference on High Speed Machining, Metz, France. 2006: eScholarID:2e334
• Abukshim N, Mativenga P, Sheikh M. Heat Generation and Temperature Prediction in Metal Cutting: A Review and Implications for High Speed Machining. International Journal of Machine Tools and Manufacture. 2006; 12: 782-800. eScholarID:1e1407
• Iqbal, S A, Paul Mativenga, and Mohammad Sheikh. An Evaluation of Flow Stress Material Models of AISI 1045 Steel for High Speed Machining. 4th Int. Conf. on Manufacturing Research (ICMR 2006), Liverpool John Moors University. 2006: eScholarID:2e337
• Mativenga P, Abukhshim N, Sheikh M, Hon K. An Investigation of Tool Chip Contact Phenomena in High Speed Turning Using Coated Tools. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2006; 5(220): 657-668. eScholarID:1e310

2005

• Mativenga P. T., Hon K.K.B. An Experimental Study of cutting forces in High Speed End Milling Implications for dynamic force Modelling. Journal of Manufacturing Science and Engineering. 2005 May; 127(2): eScholarID:1a9749 | DOI:10.1115/1.1863254
• MATIVENGA P.T.; ABUKHSHIM, N. A.; SHEIKH, M An investigation of heat partition in high speed turning of high strength alloy steel. International Journal of Machine Tools and Manufacture. 2005 April; 45(15): eScholarID:1a9751 | DOI:10.1016/j.ijmachtools.2005.03.008
• Mativenga P. T., and Hon, K K B. Wear and Cutting Forces in High Speed Machining of H13 Tool Steel Using PVD Coated Carbide Tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2005; 219: eScholarID:1a1240
• P.T. MATIVENGA, S.S. BOSEH. White layer formation in hard turning of H13 tool steel at high cutting speeds using CBN tooling. International Journal of Machine Tools and Manufacture. 2005 May; 46(2): eScholarID:1a9752 | DOI:10.1016/j.ijmachtools.2005.04.009
• Abukhshim N, Mativenga P, Sheikh M. Investigation of heat partition in high speed turning of high strength alloy steel. International Journal of Machine Tools and Manufacture. 2005; 45: 1687-1695. eScholarID:1e1203
• Mativenga P, Hon K. An Experimental Study of Cutting Forces in High Speed End Milling and Implications for Dynamic Force Modelling. Transactions of the ASME, Journal of Manufacturing Science and Engineering. 2005 May; 127(2): 251-261. eScholarID:1e1198
• Mativenga P, Hon K. Wear and Cutting Forces in High Speed Machining of H13 Tool Steel Using PVD Coated Carbide Tools. 2005; 219: eScholarID:1e1200
• Mativenga P, Hon K. Wear and cutting forces in high-speed machining of H13 using physical vapour deposition coated carbide tools. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2005; 219: 191-199. eScholarID:1e756

2004

• MATIVENGA P.T., ABUKHSHIM, N. A., SHEIKH, M., HON, K.K.B. An investigation of the tool-chip contact length and wear in high speed turning of EN19 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2004 August; 218(8): eScholarID:1a9750 | DOI:10.1243/0954405041486064
• Abukhshim N, Mativenga P, Sheikh M. An Investigation of The Tool Chip Contact Length and Wear in High Speed Turning of EN19 Tool Steel. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2004; 218: 889-903. eScholarID:1e1201
• Bosheh S, Mativenga P. White Layer Formation in hard turning of H13 Tool steel at high cutting speeds using CBN Tooling. International Journal of Machine Tools and Manufacture. 2004 February; 46(2): 225-233. eScholarID:1e1202
• El-houry, M, N Driver, and Paul Mativenga. Chip morphology and cutting forces in High Speed Milling of titanium 6Al-4V alloy. Proc. 34th International MATADOR Conference. 2004: 111-118. eScholarID:2e539

2003

• P T Mativenga and K K B Hon. A study of cutting forces and surface finish in high-speed machining of AISI H13 tool steel using carbide tools with TiAlN based coatings. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2003; 217: eScholarID:1a3919
• Mativenga P, Hon K. A Study of Cutting Forces and Surface Finish in High Speed Machining of AISI H13 Tool Steel Using Carbide Tools With TiAlN Based Coatings. Proceedings of the Institution of Mechanical Engineers - Part B: Journal of Engineering Manufacture. 2003; 217: 143-151. eScholarID:1e1199