- UCAS course code
- UCAS institution code
BEng Electronic Engineering with Industrial Experience / Course details
Year of entry: 2023
- View tabs
- View full page
Course unit details:
Electronic Circuit Design II
|Unit level||Level 2|
|Teaching period(s)||Semester 2|
|Offered by||Department of Electrical & Electronic Engineering|
|Available as a free choice unit?||No|
This unit will cover the following:
(1) Fundamental concepts
(2) Ideal linear op-amp circuits, such as inverting amplifier, non-inverting amplifier, summing amplifier, instrumentation amplifier, Wheatstone bridge,
(3) Phase-sensitive demodulation (lab)
(4) Non-ideal linear op-amp circuits
(4) Static limitations of op-amps, such as bias current, offset current, offset voltage
(5) Dynamic limitations or frequency response of op-amps
(6) Filters, such as low-pass (including 2nd order Butterworth low-pass), high-pass, band-pass, notch and all-pass filters
(7) Non-linear circuits, such as rectifier, phase-sensitive demodulator
(8)Digital-to-analogue converter (DAC), such as ladder network
(9) Analogue-to-digital converter (ADC), such as dual-ramp, successive approximation
|Unit title||Unit code||Requirement type||Description|
|Electronic Circuit Design I||EEEN10232||Pre-Requisite||Compulsory|
This course unit detail provides the framework for delivery in 2020/21 and may be subject to change due to any additional Covid-19 impact. Please see Blackboard / course unit related emails for any further updates.
The course unit aims to:
- To understand fundamental electronic circuits for engineering applications.
- To gain ability of analysing and designing electronic circuits.
- To gain practical skills by building and testing electronic circuits in lab, using real electronic components.
All of the following Intended Learning Outcomes (ILOs) are developed and assessed. On the successful completion of the course, students will be able to:
ILO 1: Analyse common analogue circuit diagrams to identify and interpret circuit behaviours in time and frequency domains.
ILO 2: Produce circuit designs for a given specification and Select component types and values in common circuit configurations.
ILO 3: Model circuit using simulation software packages
ILO 4: Apply analytical approaches to simple linear and non-linear circuits
ILO 5: Assembly electronic circuits using real components
ILO 6: Test electronic circuits on bread-board and analyse the measurement results from the circuits.
The examination forms 80% of the unit assessment
Two laboratory sessions
Laboratory duration: 6 hours
Each lab session is assessed by 2% attendance and 2% performance
All students must attend all lab sessions. Otherwise, their report will not be marked.
Laboratory assessments are weighted 20%
|Scheduled activity hours|
|Practical classes & workshops||6|
|Independent study hours|
|Wuliang Yin||Unit coordinator|