In April 2016 Manchester eScholar was replaced by the University of Manchester’s new Research Information Management System, Pure. In the autumn the University’s research outputs will be available to search and browse via a new Research Portal. Until then the University’s full publication record can be accessed via a temporary portal and the old eScholar content is available to search and browse via this archive.

Related resources

Search for item elsewhere

University researcher(s)

Academic department(s)

Inkjet Printing of Silver for Direct Write Applications

Xu, Bojun

[Thesis]. Manchester, UK: The University of Manchester; 2010.

Access to files

FULL-TEXT.PDF (pdf)

Abstract

Direct Write (DW) defines an emerging group of technologies that allow the printing of electronic and other functional components out of vacuum, directly onto conformal surfaces. Both ink-jet and nozzle deposition technologies, which are seen to be complementary for the wide range of materials and processing required by industry, are employed in this project.Silver neodecanoate salt is sensitive to both light source, including ultra violet light (UV) and heat source, and is a good inkjet printing precursor when dissolved in xylene. We have studied the electrical properties of inkjet printed silver samples, derived from silver neodecanoate ink, and investigated the influence of UV treatment before thermal curing the silver samples. UV exposure at room temperature is believed to control the nucleation of silver particles. In addition we have studied the influence of thermal pre-treatment on the printed samples. This pre-treatment is thought to assist the neodecanoate precursor to form a uniform distribution of silver nanoparticles. The influence of UV exposure, thermal pre-treatment and the thermal curing conditions on subsequent track microstructure, and its influence on electrical resistivity is reported for glass substrates. Furthermore, a series of extruding experimental at different nozzle offset and pumping pressure settings are conducted based on the rheological property of silicone oil and silver paste to find the ideal condition for producing continuous tracks with good shape. These findings are used to simulate a computer model for further applications.