- UCAS course code
- UCAS institution code
This course may be available through clearing
MEng Chemical Engineering with Study in Europe / Course details
Year of entry: 2021
- View tabs
- View full page
Course unit details:
Process Engineering Fundamentals
|Unit level||Level 1|
|Teaching period(s)||Semester 1|
|Offered by||Department of Chemical Engineering & Analytical Science|
|Available as a free choice unit?||No|
Basic engineering calculations:
- Unit conversions
- Order of magnitude
- Dimensional homogeneity
- Classification (batch, fed batch, continuous, transient, steady state)
- Unit operations (general definition, introduction of concept)
- Flow diagrams
- General material balance equation
- Differential and integral balances (system boundaries, degrees of freedom analysis)
- Material balances for non-reacting systems
- Material balances for reacting systems (stoichiometry, conversion, excess/limiting reactant, yield, selectivity)
- Processes with more than one unit operation, recycle and purge
- First law of Thermodynamics and forms of energy
- Energy balances for closed systems
- Energy balances for open systems (steady state)
- Energy balance calculations for reacting systems (enthalpy, reference state, heat of reaction, heat of formation, single and multi-phase systems)
Case study: combined material and energy balances
The unit aims to:
- Extend student knowledge of basic engineering calculations.
- Give students understanding of process classification and analysis.
- Introduce the concept of unit operations.
- Provide a framework and problem solving approach for complex engineering calculations.
- Introduce and apply the principles of conservation of mass and energy to determine the material and energy requirements of a process.
Students should be able to:
ILO 1:Convert data between different unit systems.
ILO 2:Describe and classify processes (batch, continuous, steady state etc.)
ILO 3:Explain the concept of unit operations and its importance in chemical engineering.
ILO 4:Interpret process flow diagrams and create simple block diagrams as a basis for further analysis.
ILO 5:Apply the concepts of conservation of mass and energy to calculate the material and energy requirements of a process for reacting and non-reacting systems.
ILO 6:Calculate theoretical and excess air, yield, conversion and selectivity in reactive processes
ILO 7:Use knowledge of the first law of thermodynamics to derive the energy balance equations for closed and open systems.
ILO 8:Preliminary understanding of process design considerations.
ILO 9:Construct flow charts given a process description for multi-stage processes, including those with recycle and purge streams.
ILO 11:Perform simple design calculations.
ILO 12:Demonstrate problem solving skills.
ILO 13:Be able to work in a team to solve engineering problems skills.
ILO 14:Apply understanding of processes and their classification, material and energy requirements to other course units.
Teaching and learning methods
Lectures provide fundamental aspects supporting the critical learning of the module and will be delivered as pre-recorded asynchronous short videos via our virtual learning environment.
Synchronous sessions will support the lecture material with Q&A and problem-solving sessions where you can apply the new concepts. Surgery hours are also available for drop-in support.
Feedback on problems and examples, feedback on coursework and exams, and model answers will also be provided through the virtual learning environment. A discussion board provides an opportunity to discuss topics related to the material presented in the module.
Students are expected to expand the concepts presented in the session and online by additional reading (suggested in the Online Reading List) in order to consolidate their learning process and further stimulate their interest to the module.
- Core Learning Material (e.g. recorded lectures, problem solving sessions): 24 hours
- Self-Guided Work (e.g. continuous assessment, extra problems, reading) : 44 hours
- Exam Style Assessment Revision and Preparation: 32 hours
Knowledge and understanding
- Convert data between different unit systems.
- Describe and classify processes (batch, continuous, steady state etc.).
- Explain the concept of unit operations and its importance in chemical engineering.
- Interpret process flow diagrams and create simple block diagrams as a basis for further analysis.
- Apply the concepts of conservation of mass and energy to calculate the material and energy requirements of a process for reacting and non-reacting systems.
- Calculate theoretical and excess air, yield, conversion and selectivity in reactive processes
- Use knowledge of the first law of thermodynamics to derive the energy balance equations for closed and open systems.
- Preliminary understanding of process design considerations.
- Construct flow charts given a process description for multi-stage processes, including those with recycle and purge streams.
- Perform simple design calculations.
Transferable skills and personal qualities
- Demonstrate problem solving skills.
- Be able to work in a team to solve engineering problems skills.
- Apply understanding of processes and their classification, material and energy requirements to other course units.
Exam style assessments
Please note that the exam style assessments weighting may be split over midterm and end of semester exams.
For each assessment
Reading lists are accessible through the Blackboard system linked to the library catalogue.
|Independent study hours|
|James Winterburn||Unit coordinator|
This course unit detail provides the framework for delivery in 20/21 and may be subject to change due to any additional Covid-19 impact. Please see Blackboard / course unit related emails for any further updates.