- UCAS course code
- UCAS institution code
This course may be available through clearing
MEng Chemical Engineering with Study in Europe / Course details
Year of entry: 2021
- View tabs
- View full page
Course unit details:
Process Heat Transfer
|Unit level||Level 1|
|Teaching period(s)||Semester 2|
|Offered by||Department of Chemical Engineering & Analytical Science|
|Available as a free choice unit?||No|
Fundamentals of Heat Transfer: heat transfer mechanisms including conduction, convection and radiation, and their underlying laws (Fourier’s law, Newton’s law of cooling and Stefan-Boltzmann Law); concept of heat transfer rate (driving force/resistance); basics of heat transfer with phase change including condensation (e.g. filmwise condensation) and boiling (e.g. pool boiling), basics of heat exchangers (including condensers and reboilers/vaporisers)
Heat transfer applications: heat loss, insulation, transient heat transfer, basics for designing shell-and-tube heat exchangers (e.g. overall heat transfer coefficient, fouling, effective temperature differences, log mean temperature difference, correction factor for different shell and tube configurations and design, rating and simulation of shell-and-tube heat exchangers (including condensers and reboilers).
The unit aims to:
To introduce the fundamentals of heat transfer science and the heat transfer applications related to chemical engineering with emphasis on the design of shell-and-tube heat exchangers (including reboilers and condensers)
ILO 1.Explain basic concepts in heat transfer and the three heat transfer mechanisms in relation to their governing laws
ILO 2.Explain general heat transfer equations and the concept of thermal resistance
ILO 3.Describe the heat transfer with phase changes, i.e. condensation and pool boiling
ILO 4.Explain and calculate thermal radiation problems in enclosed systems, insulation problems and transient heating/cooling problems
ILO 5.Describe heat exchangers and their classifications (including condensers and reboilers)
ILO 6. Design of heat exchangers (sizing and rating problems) including condensers and reboilers
Teaching and learning methods
Lectures provide fundamental aspects supporting the critical learning of the module and will be delivered as pre-recorded asynchronous short videos via our virtual learning environment.
Synchronous sessions will support the lecture material with Q&A and problem-solving sessions where you can apply the new concepts. Surgery hours are also available for drop-in support.
Feedback on problems and examples, feedback on coursework and exams, and model answers will also be provided through the virtual learning environment. A discussion board provides an opportunity to discuss topics related to the material presented in the module.
Students are expected to expand the concepts presented in the session and online by additional reading (suggested in the Online Reading List) in order to consolidate their learning process and further stimulate their interest to the module.
- Core Learning Material (e.g. recorded lectures, problem solving sessions): 24 hours
- Self-Guided Work (e.g. continuous assessment, extra problems, reading) : 44 hours
- Exam Style Assessment Revision and Preparation: 32 hours
Exam style assessments
Please note that the exam style assessments weighting may be split over midterm and end of semester exams.
Generic course feedback after exam board.
Reading lists are accessible through the Blackboard system linked to the library catalogue.
|Independent study hours|
|Xiaolei Fan||Unit coordinator|
This course unit detail provides the framework for delivery in 20/21 and may be subject to change due to any additional Covid-19 impact. Please see Blackboard / course unit related emails for any further updates.