- UCAS course code
- UCAS institution code
MEng Chemical Engineering with Energy and Environment / Course details
Year of entry: 2023
- View tabs
- View full page
Course unit details:
|Unit level||Level 2|
|Teaching period(s)||Semester 2|
|Offered by||Department of Chemical Engineering & Analytical Science|
|Available as a free choice unit?||No|
The use of energy to produce products is fundamental in the chemical process industries. Energy sources such as gas, oil, and coal are becoming increasingly costly, and also lead to environmental problems. Minimising the use of external heating and cooling sources and making the most efficient use of available energy is a cornerstone in the design of chemical processes.
This unit will briefly examine the various types of heat exchanger devices available to transfer heat between streams in chemical processes, and evaluate factors that contribute to the overall specification and design of these heat exchange devices, including heat transfer coefficients, pressure drops, and temperature differences.
The unit will also evaluate opportunities to minimise and target energy use prior to the detailed design of the energy exchange (or heat exchanger) network. Such targets can be used to scope and screen many design options quickly and effectively without having to carry out the designs. Methodologies, including the well established Pinch Analysis, are developed and evaluated for both new design and retrofit (existing design) scenarios. Once design options have been chosen using targets (both energy and capital), then systematic procedures allow the targets to be achieved in practice. The external heating and cooling requirements of the chemical process can also be evaluated and included in this design. The use and design of fired heaters in providing external heating to chemical processes will be considered in some detail.
The unit aims to:
To examine, understand, and evaluate the use of heat exchangers, including networks of heat exchangers, within chemical processes in order to maximise heat recovery, and with regards to operating and capital costs. The unit will evaluate techniques to determine the effective use of energy within chemical processes, maximising heat recovery and minimising the use of external heating and cooling utilities. Techniques will be developed for the design of networks of heat exchangers within chemical processes that meet targeted minimum energy requirements. Additional heating and cooling requirements of chemical processes will be evaluated, and suitable types of hot and cold utilities required to meet this requirement will be appraised. Methods of integrating hot and cold utilities into chemical processes will be assessed. Capital costs of heat recovery will be examined with the use of area targeting approaches. Detailed design of fired heaters will be examined.
ILO 1: Assess the sources and sinks of energy contained in chemical processes and the significance of effective integration to achieve energy efficiency
ILO 2:Develop, evaluate, and demonstrate the targeting methodologies available to heat integrate chemical processes in order to maximise heat recovery, minimise externally sourced energy use, and improve energy efficiency
ILO 3:Appraise and assess the implications of the process pinch on heat recovery and external energy use, and the heat integration potential on the design of heat exchanger networks
ILO 4:Develop, evaluate, and demonstrate methods of heat exchanger network design in order to achieve maximum targeted heat recovery and minimum externally sourced energy use in chemical processes
ILO 5: Evaluate the sources of heating and cooling supply utilities, and demonstrate and assess methods of heating and cooling supply utilities integration into chemical processes and heat exchanger networks
ILO 6:Examine and evaluate capital cost implications of heat recovery by area targeting techniques
ILO 7:Assess and demonstrate models of fired heater designs for the production of high temperature heat sources for chemical processes
Teaching and learning methods
Lectures provide fundamental aspects supporting the critical learning of the module and will be delivered as pre-recorded asynchronous short videos via our virtual learning environment.
Synchronous sessions will support the lecture material with Q&A and problem-solving sessions where you can apply the new concepts. Surgery hours are also available for drop-in support.
Feedback on problems and examples, feedback on coursework and exams, and model answers will also be provided through the virtual learning environment. A discussion board provides an opportunity to discuss topics related to the material presented in the module.
Students are expected to expand the concepts presented in the session and online by additional reading (suggested in the Online Reading List) in order to consolidate their learning process and further stimulate their interest to the module.
- Core Learning Material (e.g. recorded lectures, problem solving sessions): 24 hours
- Self-Guided Work (e.g. continuous assessment, extra problems, reading) : 44 hours
- Exam Style Assessment Revision and Preparation: 32 hours
Exam style assessments
Please note that the exam style assessments weighting may be split over midterm and end of semester exams.
Reading lists are accessible through the Blackboard system linked to the library catalogue.
|Simon Perry||Unit coordinator|
This course unit detail provides the framework for delivery in 20/21 and may be subject to change due to any additional Covid-19 impact. Please see Blackboard / course unit related emails for any further updates.