Information regarding new applications

2021/22

Our 2021/22 postgraduate taught admissions cycle opens on Monday, 26 October. While we welcome you to apply now, please note that we will not start to review and process applications until after this date.

2020

If you would like to be considered for 2020 entry, this course is currently still accepting applications.

MSc Corrosion Control Engineering

Year of entry: 2021

Coronavirus information for applicants and offer-holders

We understand that prospective students and offer-holders may have concerns about the ongoing coronavirus outbreak. The University is following the advice from Universities UK, Public Health England and the Foreign and Commonwealth Office.

Read our latest coronavirus information

Overview

Degree awarded
Master of Science
Duration
12 Months. [Full-Time]
Entry requirements

You will need at least a UK 2.2 Honours degree or overseas equivalent in Materials Science, Physics, Metallurgical Engineering and Chemistry, Chemical Engineering (Other subjects in a Science, Engineering or Technology field will be considered, but a UK 2.1 Honours degree is needed).

Full entry requirements

How to apply

As there is high demand for this course we operate a staged admissions process with selection deadlines throughout the year. Due to the competition for places, we give preference to students with grades above our minimum entry requirements. If we make you an offer, you will have 6 weeks in which to accept. Any offers not accepted within 6 weeks will be withdrawn so that an offer can be made to another candidate. 

Stage 1: Application deadline Monday 26 October 2020 , decision communicated by Friday 18 December

Stage 2: Application deadline Monday 11 January 2021 , decision communicated by Friday 19 February

Stage 3: Application deadline Monday 8 March 2021 , decision communicated by Friday 30 April

Stage 4: Application deadline Monday 10 May 2021 , decision communicated by Friday 02 July

You need to ensure that you submit your supporting documents with your application as it may delay us processing your application before the decision deadline.

Whilst we aim to give you a decision on your application by the deadline date, in some instances due to the competition for places and the volume of applications received, it may be necessary to roll your application forward to the next deadline date. If this is the case we will let you know after the deadline date.

Applications received after our final selection deadline will be considered at our discretion if places are still available.

Please note: All places are subject to availability and if you apply at one of the later stages, some courses may already be closed. We therefore recommend that you apply early in the cycle to secure your place with us.

Applicants who are made a conditional offer of a place must demonstrate that they have met all the conditions of their offer by 31st July 2021.

Course options

Full-time Part-time Full-time distance learning Part-time distance learning
MSc Y N N N

Course overview

The MSc in Corrosion Control Engineering provides a thorough training in corrosion and its control. The course covers fundamental chemistry, physics, electrochemistry and metallurgy underpinning corrosion processes.

As there is high demand for this course we operate a staged admissions process with selection deadlines throughout the year. Please see Application and Selection section for more details.

Open days

For details of the next University Postgraduate open day, visit open days and visits

Fees

For entry in the academic year beginning September 2021, the tuition fees are as follows:

  • MSc (full-time)
    UK students (per annum): £11,500
    International, including EU, students (per annum): £25,000

Further information for EU students can be found on our dedicated EU page.

The fees quoted above will be fully inclusive for the course tuition, administration and computational costs during your studies.

All fees for entry will be subject to yearly review and incremental rises per annum are also likely over the duration of courses lasting more than a year for UK/EU students (fees are typically fixed for International students, for the course duration at the year of entry). For general fees information please visit: postgraduate fees . Always contact the department if you are unsure which fee applies to your qualification award and method of attendance.

Self-funded international applicants for this course will be required to pay a deposit of £1000 towards their tuition fees before a confirmation of acceptance for studies (CAS) is issued. This deposit will only be refunded if immigration permission is refused. We will notify you about how and when to make this payment.

This course does not require and ATAS certificate. 

Policy on additional costs

All students should normally be able to complete their programme of study without incurring additional study costs over and above the tuition fee for that programme. Any unavoidable additional compulsory costs totalling more than 1% of the annual home undergraduate fee per annum, regardless of whether the programme in question is undergraduate or postgraduate taught, will be made clear to you at the point of application. Further information can be found in the University's Policy on additional costs incurred by students on undergraduate and postgraduate taught programmes (PDF document, 91KB).

Contact details

Department
Department of Materials
Contact name
Postgraduate Admissions Team
Email
Website
https://www.manchester.ac.uk/materials
School/Faculty

Our internationally-renowned expertise across the School of Natural Sciences informs research led teaching with strong collaboration across disciplines, unlocking new and exciting fields and translating science into reality.  Our multidisciplinary learning and research activities advance the boundaries of science for the wider benefit of society, inspiring students to promote positive change through educating future leaders in the true fundamentals of science. Find out more about Science and Engineering at Manchester .

Courses in related subject areas

Use the links below to view lists of courses in related subject areas.

Entry requirements

Academic entry qualification overview

You will need at least a UK 2.2 Honours degree or overseas equivalent in Materials Science, Physics, Metallurgical Engineering and Chemistry, Chemical Engineering (Other subjects in a Science, Engineering or Technology field will be considered, but a UK 2.1 Honours degree is needed).

English language

All applicants will need to demonstrate competency in English language. Applicants who do not already possess an acceptable English Language qualification will need to take a recognised test and attain the required English Language score:

  • IELTS:  at least 6.5 overall with no sub-test below 6.0.  
  • TOFEL iBT:  at least 90 overall with no sub-test below 20. We do not accept 'MyBestScore'.
  • Pearson PTE: at least 58 overall with no sub-test below 50.

Further information on language requirements can be found on our website .

Pre-sessional English

We will consider applicants who do not meet these scores but you may be required to complete a pre-sessional English language course at the University of Manchester prior to the start of the course.

To be considered for a pre-sessional English language course for this programme we require the following minimum IELTS (Academic) scores:

  • 6 Week Pre-Sessional Course:  Minimum 6.0 overall with no sub-test below 5.5.
  • 10 Week Pre-sessional Course: Minimum 5.5 overall with no sub-test below 5.5.

If you have not yet completed your current academic study and are interested in studying a pre-sessional course, you must hold an IELTS for UKVI (Academic) test certificate.

English language test validity

Some English language test results are only valid for two years. Your English language test report must be valid on the start date of the course.

Professional entry qualification

A combination of educational and professional qualifications and industrial experience may also be approved for admission onto the programme.

Application and selection

How to apply

As there is high demand for this course we operate a staged admissions process with selection deadlines throughout the year. Due to the competition for places, we give preference to students with grades above our minimum entry requirements. If we make you an offer, you will have 6 weeks in which to accept. Any offers not accepted within 6 weeks will be withdrawn so that an offer can be made to another candidate. 

Stage 1: Application deadline Monday 26 October 2020 , decision communicated by Friday 18 December

Stage 2: Application deadline Monday 11 January 2021 , decision communicated by Friday 19 February

Stage 3: Application deadline Monday 8 March 2021 , decision communicated by Friday 30 April

Stage 4: Application deadline Monday 10 May 2021 , decision communicated by Friday 02 July

You need to ensure that you submit your supporting documents with your application as it may delay us processing your application before the decision deadline.

Whilst we aim to give you a decision on your application by the deadline date, in some instances due to the competition for places and the volume of applications received, it may be necessary to roll your application forward to the next deadline date. If this is the case we will let you know after the deadline date.

Applications received after our final selection deadline will be considered at our discretion if places are still available.

Please note: All places are subject to availability and if you apply at one of the later stages, some courses may already be closed. We therefore recommend that you apply early in the cycle to secure your place with us.

Applicants who are made a conditional offer of a place must demonstrate that they have met all the conditions of their offer by 31st July 2021.

Advice to applicants

We require the following documents before we can consider your application.

  • Latest transcripts of study showing all modules completed including credit weighting and grades achieved
  • If you have not yet graduated, a list of the modules that you will be completing in the final year of your degree together with their credit weighting
  • An official document from your university verifying your current weighted average mark if this information is not included in your transcript of study. Please note : this must be recorded as a percentage, not as a GPA grade, and must give the weighted average mark, not an arithmetic average mark
  • At least one academic reference on letter headed paper. These can be scanned and uploaded when you apply or emailed to pgt-materials@manchester.ac.uk . We do not request references on an applicant's behalf and it is your responsibility to ensure your referees know how to provide your reference to us.
  • Degree certificate if you have already graduated.
  • Curriculum vitae (CV) if you graduated more than three years ago.

If English is not your first language, we also require proof of your English language ability. If you have already taken an English language qualification, please include your certificate with your application. We may be willing to consider your application without this document, but if we choose to make you an offer, the conditions will include IELTS (or equivalent qualification).

You must submit all these supporting documents with your application. If any of the above information is missing, we will not be able to consider your application and it will be rolled forward to the next stage or withdrawn

How your application is considered

We consider your full academic history including which course units you have taken and the marks obtained. Even if you have met our minimum entry requirements, we will take into account your marks in relevant course units in our final decision making.

If you graduated more than three years ago, we will also consider the information contained on your CV and any relevant work experience you have to assess if you are still able to fulfil the entry criteria.

Interview requirements

No interview is required for this course.

Overseas (non-UK) applicants

CAS information

Please upload a copy of your current valid passport with your application showing the photograph page with your application. For CAS purposes, this must show your full name, date of birth, nationality, passport number and the date the passport is valid until, which must be later than the date of your planned arrival in the UK, and the start date of your course.

If you have previously studied in the UK on a Tier 4 visa as an undergraduate or postgraduate student, please send a copy of your previous CAS statement to us as it will assist with the issue of your new CAS statement. This includes study in the UK on study abroad programmes and any study that you did not complete.

You cannot use your CAS to apply for a visa more than three months before the start date of your course. The Admissions Team will contact you at the appropriate time.

Your CAS number is only valid for one Tier 4 application.

Deferrals

Applications for deferred entry are not accepted for this course. If you receive an offer for 2021 entry and decide not to accept it, should you subsequently wish to be considered for 2022 entry you would be required to reapply.

Re-applications

If you applied in the previous year and your application was not successful you may apply again. Your application will be considered against the standard course entry criteria for that year of entry. In your new application you should demonstrate how your application has improved. We may draw upon all information from your previous applications or any previous registrations at the University as a student when assessing your suitability for your chosen course.

Course details

Course description

A Masters course provides you with a thorough training in corrosion and its control and is the ideal preparation for a career either in industry as a corrosion scientist /engineer, or for cutting-edge academic research.

Aims

  • To produce competent, professionally qualified graduates who are appropriately trained and will secure immediate, rewarding and useful employment in UK, European or overseas industries as corrosion scientists or engineers.
  • To provide conversion training, which is intellectually challenging, as well as being industrially relevant.
  • To satisfy the needs of engineers, scientists and technologists wishing to develop professional competence in the areas of corrosion and corrosion control methods.

Special features

Embarking upon the Corrosion Control Engineering MSc gives you direct access to the knowledge, skills and expertise of leading academics in the field of corrosion. They will teach you the fundamentals of corrosion, and provide you with insight into cutting-edge corrosion engineering problems and solutions in their specialist fields. Latterly, you will work more closely with one of these academics, becoming an active member of their research group during your dissertation project. Further to the teaching by academics, eminent guest speakers from industry are a key feature of the course, delivering invaluable first-hand practical knowledge and case studies.

Teaching and learning

The course is delivered through a mix of lecturing, blended small and small group tutorials with hands on research training.

Course unit list

The course unit details given below are subject to change, and are the latest example of the curriculum available on this course of study.

TitleCodeCredit ratingMandatory/optional
PGT Dissertation MATS63330 90 Mandatory
Introduction to Materials Science MATS64101 15 Mandatory
Research Methods MATS64201 15 Mandatory
Principles of Corrosion MATS66301 15 Mandatory
Corrosion Management MATS66402 15 Mandatory
Corrosion & Control for Industrial Processes MATS66502 15 Mandatory
Superalloys & High Performance Materials MATS64502 15 Optional
Oilfield Corrosion & Control MATS66602 15 Optional

Additional fee information

If you are made an offer, in order to confirm your place you will be required to complete and return an acceptance form along with a deposit payment of £1,000 on or before the deadline date stated in your offer letter.

We ask for the deposit as competition for places is high and there is limited availability.  The deposit amount is then deducted from your tuition fees when you register on the course.

Once we receive your payment, your place on the course will be confirmed.

The deposit is non-refundable, except in the following situations:

  • You fail to meet the conditions of your offer
  • You are refused a visa or entry clearance to enter the UK
  • Your application for government funding has been unsuccessful

Evidence must be provided before a refund will be processed under any of the circumstances above.

If your offer specifies an English Language condition which you subsequently do not meet, the Admissions Team will require the official certificate of an English Language test taken after the date of the offer as evidence that you have attempted to meet your offer conditions. The English language test certificate provided with your application documents is not accepted as proof that you have attempted to meet your offer conditions as it will pre-date the offer.

If your offer specifies an academic condition, the Admissions Team will require official university documentation as evidence that you have not met the condition from the institution at which you studied.

Scholarships and bursaries

Unfortunately, The University of Manchester does not have any funding at present. There may be external funding opportunities, please see the link for more information: http://www.manchester.ac.uk/study/masters/funding/

Facilities

Most of the MSc course is hosted within The Mill, where corrosion research activities are centred. There is a lecture theatre, and a dedicated laboratory for corrosion teaching. Also, there is a computer cluster, which students can access at any time to study and prepare coursework. There is also a coffee lounge, where students can socialise and meet with other members of the corrosion family.

Disability support

Practical support and advice for current students and applicants is available from the Disability Advisory and Support Service. Email: dass@manchester.ac.uk

Careers

Career opportunities

Opportunities for our graduates are wide ranging, with the majority of graduates going on to fill key posts as corrosion scientists, engineers, managers, and consultants in industry, or proceeding towards a career in academia. Our graduates are highly sought after and employed across a diverse range of sectors such as oil and gas, nuclear, energy production, and manufacturing. Leading industrial players target our students, with many going on to develop their careers in world renowned companies, e.g. Shell, Rolls Royce, Tata Steel, and BP.

Accrediting organisations

The MSc in Corrosion Control Engineering is accredited by the Institute of Materials Minerals and Mining (IoM3).